@Part(04, Root="ada.mss") @Comment{$Date: 2005/08/21 17:59:32 $} @LabeledSection{Names and Expressions} @Comment{$Source: e:\\cvsroot/ARM/Source/04a.mss,v $} @Comment{$Revision: 1.67 $} @begin{Intro} @Redundant[The rules applicable to the different forms of @nt and expression, and to their evaluation, are given in this section.] @end{Intro} @LabeledClause{Names} @begin{Intro} @redundant[@nts can denote declared entities, whether declared explicitly or implicitly (see @RefSecNum(Declarations)). @nts can also denote objects or subprograms designated by access values; the results of @nts or @nts; subcomponents and slices of objects and values; protected subprograms, single entries, entry families, and entries in families of entries. Finally, @nts can denote attributes of any of the foregoing.] @end{Intro} @begin{Syntax} @Syn{tabs=[P22], lhs=,rhs=" @Syn2{direct_name}@\| @Syn2{explicit_dereference} | @Syn2{indexed_component}@\| @Syn2{slice} | @Syn2{selected_component}@\| @Syn2{attribute_reference} | @Syn2{type_conversion}@\| @Syn2{function_call} | @Syn2{character_literal}"} @Syn{lhs=, rhs="@Syn2{identifier} | @Syn2{operator_symbol}"} @begin{Discussion} @nt is no longer a @nt. @nts are usable even when the corresponding @nt is not visible. See @RefSecNum(Literals). @end{Discussion} @Syn{lhs=,rhs="@Syn2{name} | @Syn2{implicit_dereference}"} @Syn{lhs=,rhs="@Syn2{name}.@key{all}"} @Syn{lhs=,rhs="@Syn2{name}"} @end{Syntax} @begin{Intro} @Redundant[Certain forms of @nt (@nts, @nts, @nts, and @nts) include a @nt that is either itself a @nt that denotes some related entity, or an @nt of an access value that designates some related entity.] @end{Intro} @begin{Resolution} @Defn{dereference} @PDefn2{Term=[expected type], Sec=(dereference @nt{name})} The @nt{name} in a @i(dereference) (either an @nt or an @nt) is expected to be of any access type. @end{Resolution} @begin{StaticSem} @PDefn2{Term=[nominal subtype], Sec=(associated with a dereference)} If the type of the @nt{name} in a dereference is some access-to-object type @i(T), then the dereference denotes a view of an object, the @i(nominal subtype) of the view being the designated subtype of @i(T). @begin{Ramification} If the value of the @nt is the result of an access type conversion, the dereference denotes a view created as part of the conversion. The nominal subtype of the view is not necessarily the same as that used to create the designated object. See @RefSecNum{Type Conversions}. @end{Ramification} @begin{Honest} @PDefn2{Term=[nominal subtype], Sec=(of a @nt)} We sometimes refer to the nominal subtype of a particular kind of @nt rather than the nominal subtype of the view denoted by the @nt (presuming the @nt denotes a view of an object). These two uses of nominal subtype are intended to mean the same thing. @end{Honest} @PDefn2{Term=[profile], Sec=(associated with a dereference)} If the type of the @nt in a dereference is some access-to-subprogram type @i(S), then the dereference denotes a view of a subprogram, the @i(profile) of the view being the designated profile of @i(S). @begin{Ramification} This means that the formal parameter names and default expressions to be used in a call whose @nt or @nt is a dereference are those of the designated profile, which need not be the same as those of the subprogram designated by the access value, since 'Access requires only subtype conformance, not full conformance. @end{Ramification} @end{StaticSem} @begin{RunTime} @ChgRef{Version=[2],Kind=[Revised],ARef=[AI95-00415-01]} @PDefn2{Term=[evaluation], Sec=(name)} The evaluation of a @nt determines the entity denoted by the @Chg{Version=[2],New=[@nt],Old=[name]}. This evaluation has no other effect for a @nt that is a @nt or a @nt. @PDefn2{Term=[evaluation], Sec=(name that has a prefix)} @Redundant[The evaluation of a @nt that has a @nt includes the evaluation of the @nt.] @PDefn2{Term=[evaluation], Sec=(prefix)} The evaluation of a @nt{prefix} consists of the evaluation of the @nt{name} or the @nt{implicit_dereference}. The @nt{prefix} denotes the entity denoted by the @nt{name} or the @nt{implicit_dereference}. @PDefn2{Term=[evaluation], Sec=(dereference)} The evaluation of a dereference consists of the evaluation of the @nt{name} and the determination of the object or subprogram that is designated by the value of the @nt{name}. @IndexCheck{Access_Check} A check is made that the value of the @nt{name} is not the null access value. @Defn2{Term=[Constraint_Error],Sec=(raised by failure of run-time check)} Constraint_Error is raised if this check fails. The dereference denotes the object or subprogram designated by the value of the @nt{name}. @end{RunTime} @begin{Examples} @Leading@keepnext@i(Examples of direct names:) @begin(Example) @tabclear()@tabset(P9, P47) Pi @\@RI(-- the direct name of a number) @\(see @RefSecNum(Number Declarations)) Limit @\@RI(-- the direct name of a constant) @\(see @RefSecNum(Object Declarations)) Count @\@RI(-- the direct name of a scalar variable) @\(see @RefSecNum(Object Declarations)) Board @\@RI(-- the direct name of an array variable) @\(see @RefSecNum(Index Constraints and Discrete Ranges)) Matrix @\@RI(-- the direct name of a type) @\(see @RefSecNum(Array Types)) Random @\@RI(-- the direct name of a function) @\(see @RefSecNum(Subprogram Declarations)) Error @\@RI(-- the direct name of an exception) @\(see @RefSecNum(Exception Declarations)) @end(Example) @begin{Wide} @leading@keepnext@i{Examples of dereferences:} @end{Wide} @begin{Example}@tabclear()@tabset(P19) Next_Car.@key[all]@\--@RI[ explicit dereference denoting the object designated by] @\--@RI[ the access variable Next_Car (see @RefSecNum{Incomplete Type Declarations})] Next_Car.Owner @\--@RI[ selected component with implicit dereference;] @\--@RI[ same as Next_Car.@key[all].Owner] @end{Example} @end{Examples} @begin{Extend83} @Defn{extensions to Ada 83} Type conversions and function calls are now considered names that denote the result of the operation. In the case of a type conversion used as an actual parameter or that is of a tagged type, the type conversion is considered a variable if the operand is a variable. This simplifies the description of "parameters of the form of a type conversion" as well as better supporting an important OOP paradigm that requires the combination of a conversion from a class-wide type to some specific type followed immediately by component selection. Function calls are considered names so that a type conversion of a function call and the function call itself are treated equivalently in the grammar. A function call is considered the name of a constant, and can be used anywhere such a name is permitted. See @RefSecNum(Return Statements). @ChgRef{Version=[1],Kind=[Revised]}@ChgNote{To be consistent with 8652/0006} Type conversions of a tagged type are permitted anywhere their operand is permitted. That is, if the operand is a variable, then the type conversion can appear on the left-hand side of an @nt{assignment_statement}. If the operand is an object, then the type conversion can appear in an object renaming or as a @Chg{New=[@nt{prefix}],Old=[prefix]}. See @RefSecNum(Type Conversions). @end{Extend83} @begin{DiffWord83} @ChgRef{Version=[2],Kind=[Revised],ARef=[AI95-00114-01]} Everything of the general syntactic form @nt{name}(...) is now syntactically a @nt{name}. In any realistic parser, this would be a necessity since distinguishing among the various @nt{name}(...) constructs inevitably requires name resolution. In cases where the construct yields a value rather than an object, the name denotes @Chg{Version=[2],New=[a],Old=[the]} value rather than an object. Names already denote values in Ada 83 with named numbers, components of the result of a function call, etc. This is partly just a wording change, and partly an extension of functionality (see Extensions heading above). The syntax rule for @nt{direct_name} is new. It is used in places where direct visibility is required. It's kind of like Ada 83's @nt{simple_name}, but @nt{simple_name} applied to both direct visibility and visibility by selection, and furthermore, it didn't work right for @nt{operator_symbol}s. The syntax rule for @nt{simple_name} is removed, since its use is covered by a combination of @nt{direct_name} and @nt{selector_name}. The syntactic categories @nt{direct_name} and @nt{selector_name} are similar; it's mainly the visibility rules that distinguish the two. The introduction of @nt{direct_name} requires the insertion of one new explicit textual rule: to forbid @nts from being @nts. This is the only case where the explicit rule is needed, because this is the only case where the declaration of the entity is implicit. For example, there is no need to syntactically forbid (say) @lquotes@;X: "Rem";@rquotes@;, because it is impossible to declare a type whose name is an @nt{operator_symbol} in the first place. The syntax rules for @nt{explicit_dereference} and @nt{implicit_dereference} are new; this makes other rules simpler, since dereferencing an access value has substantially different semantics from @nt{selected_component}s. We also use @nt{name} instead of @nt{prefix} in the @nt{explicit_dereference} rule since that seems clearer. Note that these rules rely on the fact that function calls are now names, so we don't need to use prefix to allow functions calls in front of .@key{all}. @begin{Discussion} Actually, it would be reasonable to allow any @nt{primary} in front of .@key{all}, since only the value is needed, but that would be a bit radical. @end{Discussion} We no longer use the term @i(appropriate for a type) since we now describe the semantics of a prefix in terms of implicit dereference. @end{DiffWord83} @LabeledSubClause{Indexed Components} @begin{Intro} @Redundant[An @nt denotes either a component of an array or an entry in a family of entries. @IndexSee{Term=[array indexing],See=(indexed_component)}] @end{Intro} @begin{Syntax} @Syn{lhs=,rhs="@Syn2{prefix}(@Syn2{expression} {, @Syn2{expression}})"} @end{Syntax} @begin{Resolution} The @nt{prefix} of an @nt{indexed_component} with a given number of @nts shall resolve to denote an array (after any implicit dereference) with the corresponding number of index positions, or shall resolve to denote an entry family of a task or protected object (in which case there shall be only one @nt). @PDefn2{Term=[expected type], Sec=(indexed_component expression)} The expected type for each @nt{expression} is the corresponding index type. @end{Resolution} @begin{StaticSem} When the @nt denotes an array, the @nt denotes the component of the array with the specified index value(s). @PDefn2{Term=[nominal subtype], Sec=(associated with an @nt)} The nominal subtype of the @nt is the component subtype of the array type. @begin{Ramification} @ChgRef{Version=[2],Kind=[Deleted],ARef=[AI95-00363-01]} @ChgDeleted{Version=[2],Text=[In the case of an array whose components are aliased, and of an unconstrained discriminated subtype, the components are constrained even though their nominal subtype is unconstrained. (This is because all aliased discriminated objects are constrained. See @RefSecNum(Operations of Access Types).) In all other cases, an array component is constrained if and only if its nominal subtype is constrained.]} @end{Ramification} When the @nt denotes an entry family, the @nt denotes the individual entry of the entry family with the specified index value. @end{StaticSem} @begin{RunTime} @PDefn2{Term=[evaluation], Sec=(indexed_component)} For the evaluation of an @nt, the @nt{prefix} and the @nt{expression}s are evaluated in an arbitrary order. The value of each @nt is converted to the corresponding index type. @PDefn2{Term=[implicit subtype conversion],Sec=(array index)} @IndexCheck{Index_Check} A check is made that each index value belongs to the corresponding index range of the array or entry family denoted by the @nt. @Defn2{Term=[Constraint_Error],Sec=(raised by failure of run-time check)} Constraint_Error is raised if this check fails. @end{RunTime} @begin{Examples} @Leading@keepnext@i(Examples of indexed components:) @begin{Example} @tabclear()@tabset(P64) My_Schedule(Sat) --@RI[ a component of a one-dimensional array @\(see @RefSecNum{Index Constraints and Discrete Ranges})] Page(10) --@RI[ a component of a one-dimensional array @\(see @RefSecNum{Array Types})] Board(M, J + 1) --@RI[ a component of a two-dimensional array @\(see @RefSecNum{Index Constraints and Discrete Ranges})] Page(10)(20) --@RI[ a component of a component @\(see @RefSecNum{Array Types})] Request(Medium) --@RI[ an entry in a family of entries @\(see @RefSecNum{Task Units and Task Objects})] Next_Frame(L)(M, N) --@RI[ a component of a function call @\(see @RefSecNum{Subprogram Declarations})] @end{Example} @end{Examples} @begin{Notes} @i(Notes on the examples:) Distinct notations are used for components of multidimensional arrays (such as Board) and arrays of arrays (such as Page). The components of an array of arrays are arrays and can therefore be indexed. Thus Page(10)(20) denotes the 20th component of Page(10). In the last example Next_Frame(L) is a function call returning an access value that designates a two-dimensional array. @end{Notes} @LabeledSubClause{Slices} @begin{Intro} @redundant[@Defn{array slice} A @nt denotes a one-dimensional array formed by a sequence of consecutive components of a one-dimensional array. A @nt of a variable is a variable; a @nt of a constant is a constant;] a @nt of a value is a value. @end{Intro} @begin{Syntax} @Syn{lhs=,rhs="@Syn2{prefix}(@Syn2{discrete_range})"} @end{Syntax} @begin{Resolution} The @nt{prefix} of a @nt{slice} shall resolve to denote a one-dimensional array (after any implicit dereference). @PDefn2{Term=[expected type], Sec=(slice discrete_range)} The expected type for the @nt{discrete_range} of a @nt is the index type of the array type. @end{Resolution} @begin{StaticSem} A @nt denotes a one-dimensional array formed by the sequence of consecutive components of the array denoted by the @nt, corresponding to the range of values of the index given by the @nt. The type of the @nt is that of the @nt. Its bounds are those defined by the @nt{discrete_range}. @end{StaticSem} @begin{RunTime} @PDefn2{Term=[evaluation], Sec=(slice)} For the evaluation of a @nt{slice}, the @nt{prefix} and the @nt{discrete_range} are evaluated in an arbitrary order. @IndexCheck{Index_Check} @Defn{null slice} If the @nt{slice} is not a @i(null slice) (a @nt where the @nt is a null range), then a check is made that the bounds of the @nt{discrete_range} belong to the index range of the array denoted by the @nt{prefix}. @Defn2{Term=[Constraint_Error],Sec=(raised by failure of run-time check)} Constraint_Error is raised if this check fails. @end{RunTime} @begin{Notes} A @nt is not permitted as the @nt of an Access @nt, even if the components or the array as a whole are aliased. See @RefSecNum(Operations of Access Types). @begin{TheProof} Slices are not aliased, by @RefSec{Access Types}. @end{TheProof} @begin(Reason) This is to ease implementation of general-access-to-array. If slices were aliased, implementations would need to store array dope with the access values, which is not always desirable given access-to-incomplete types completed in a package body. @end(Reason) For a one-dimensional array A, the @nt A(N .. N) denotes an array that has only one component; its type is the type of A. On the other hand, A(N) denotes a component of the array A and has the corresponding component type. @end{Notes} @begin{Examples} @Leading@keepnext@i(Examples of slices:) @begin{Example} @tabclear()@tabset(P58) Stars(1 .. 15) --@RI[ a slice of 15 characters @\(see @RefSecNum{String Types})] Page(10 .. 10 + Size) --@RI[ a slice of 1 + Size components @\(see @RefSecNum{Array Types})] Page(L)(A .. B) --@RI[ a slice of the array Page(L) @\(see @RefSecNum{Array Types})] Stars(1 .. 0) --@RI[ a null slice @\(see @RefSecNum{String Types})] My_Schedule(Weekday) --@RI[ bounds given by subtype @\(see @RefSecNum{Index Constraints and Discrete Ranges} and @RefSecNum{Enumeration Types})] Stars(5 .. 15)(K) --@RI[ same as Stars(K) @\(see @RefSecNum{String Types})] --@RI[ provided that K is in 5 .. 15] @end{Example} @end{Examples} @LabeledSubClause{Selected Components} @begin{Intro} @redundant[@nt{Selected_component}s are used to denote components (including discriminants), entries, entry families, and protected subprograms; they are also used as expanded names as described below. @IndexSee{Term=[dot selection],See=(selected_component)}] @end{Intro} @begin{Syntax} @Syn{lhs=,rhs="@Syn2{prefix} . @Syn2{selector_name}"} @Syn{lhs=,rhs="@Syn2{identifier} | @Syn2{character_literal} | @Syn2{operator_symbol}"} @end{Syntax} @begin{Resolution} @Defn{expanded name} A @nt is called an @i(expanded name) if, according to the visibility rules, at least one possible interpretation of its @nt denotes a package or an enclosing named construct (directly, not through a @nt or @nt). @begin{Discussion} See AI83-00187. @end{Discussion} @Leading@;A @nt{selected_component} that is not an expanded name shall resolve to denote one of the following: @begin(Ramification) If the @nt of a @nt denotes an enclosing named construct, then the @nt is interpreted only as an expanded name, even if the named construct is a function that could be called without parameters. @end(Ramification) @begin{Itemize} A component @Redundant[(including a discriminant)]: @NoPrefix@;The @nt{prefix} shall resolve to denote an object or value of some non-array composite type (after any implicit dereference). The @nt{selector_name} shall resolve to denote a @nt{discriminant_specification} of the type, or, unless the type is a protected type, a @nt of the type. The @nt{selected_component} denotes the corresponding component of the object or value. @begin{Reason} @ChgRef{Version=[1],Kind=[Revised]}@ChgNote{Presentation AI-00015} The components of a protected object cannot be named except by an expanded name, even from within the corresponding protected body. The protected body may not reference @Chg{New=[],Old=[the ]}the private components of some arbitrary object of the protected type; the protected body may reference components of the current instance only (by an expanded name or a @nt). @end{Reason} @begin{Ramification} Only the discriminants and components visible at the place of the @nt can be selected, since a @nt can only denote declarations that are visible (see @RefSecNum{Visibility}). @end{Ramification} A single entry, an entry family, or a protected subprogram: @NoPrefix@;The @nt{prefix} shall resolve to denote an object or value of some task or protected type (after any implicit dereference). The @nt{selector_name} shall resolve to denote an @nt{entry_declaration} or @nt{subprogram_declaration} occurring (implicitly or explicitly) within the visible part of that type. The @nt{selected_component} denotes the corresponding entry, entry family, or protected subprogram. @begin{Reason} This explicitly says @lquotes@;visible part@rquotes@; because even though the body has visibility on the private part, it cannot call the private operations of some arbitrary object of the task or protected type, only those of the current instance (and expanded name notation has to be used for that). @end{Reason} @ChgRef{Version=[2],Kind=[Added],ARef=[AI95-00252-01],ARef=[AI95-00407-01]} @ChgAdded{Version=[2],Text=[A view of a subprogram whose first formal parameter is of a tagged type or is an access parameter whose designated type is tagged:]} @ChgRef{Version=[2],Kind=[Added]} @ChgAdded{Version=[2],NoPrefix=[T],Text=[The @nt (after any implicit dereference) shall resolve to denote an object or value of a specific tagged type @i or class-wide type @i'Class. The @nt shall resolve to denote a view of a subprogram declared immediately within the declarative region in which an ancestor of the type @i is declared. The first formal parameter of the subprogram shall be of type @i, or a class-wide type that covers @i, or an access parameter designating one of these types. The designator of the subprogram shall not be the same as that of a component of the tagged type visible at the point of the @nt. The @nt denotes a view of this subprogram that omits the first formal parameter. This view is called a @i{prefixed view} of the subprogram, and the @nt{prefix} of the @nt (after any implicit dereference) is called the @i of the prefixed view. @Defn{prefixed view}@Defn2{Term=[prefix],Sec=[of a prefixed view]}]} @end{Itemize} @Leading@;An expanded name shall resolve to denote a declaration that occurs immediately within a named declarative region, as follows: @begin(itemize) The @nt shall resolve to denote either a package @Redundant[(including the current instance of a generic package, or a rename of a package)], or an enclosing named construct. The @nt{selector_name} shall resolve to denote a declaration that occurs immediately within the declarative region of the package or enclosing construct @Redundant[(the declaration shall be visible at the place of the expanded name @em see @RefSecNum(Visibility))]. The expanded name denotes that declaration. @begin{Ramification} Hence, a library unit or subunit can use an expanded name to refer to the declarations within the private part of its parent unit, as well as to other children that have been mentioned in @nts. @end{Ramification} If the @nt does not denote a package, then it shall be a @nt or an expanded name, and it shall resolve to denote a program unit (other than a package), the current instance of a type, a @nt{block_statement}, a @nt{loop_statement}, or an @nt{accept_@!statement} (in the case of an @nt or @nt, no family index is allowed); the expanded name shall occur within the declarative region of this construct. Further, if this construct is a callable construct and the @nt denotes more than one such enclosing callable construct, then the expanded name is ambiguous, independently of the @nt. @end(itemize) @end{Resolution} @begin{Legality} @ChgRef{Version=[2],Kind=[Added],ARef=[AI95-00252-01],ARef=[AI95-00407-01]} @ChgAdded{Version=[2],Text=[For a subprogram whose first parameter is an access parameter, the prefix of any prefixed view shall denote an aliased view of an object.]} @ChgRef{Version=[2],Kind=[Added],ARef=[AI95-00407-01]} @ChgAdded{Version=[2],Text=[For a subprogram whose first parameter is of mode @b or @b, or of an anonymous access-to-variable type, the prefix of any prefixed view shall denote a variable.]} @begin{Reason} @ChgRef{Version=[2],Kind=[AddedNormal]} @ChgAdded{Version=[2],Text=[We want calls through a prefixed view and through a normal view to have the same legality. Thus, the implicit 'Access in this new notation needs the same legality check that an explicit 'Access would have. Similarly, we need to prohibit the object from being constant if the first parameter of the subprogram is @key{in out}, because that is (obviously) prohibited for passing a normal parameter.]} @end{Reason} @end{Legality} @begin{RunTime} @PDefn2{Term=[evaluation], Sec=(selected_component)} The evaluation of a @nt{selected_component} includes the evaluation of the @nt{prefix}. @IndexCheck{Discriminant_Check} For a @nt{selected_component} that denotes a component of a @nt{variant}, a check is made that the values of the discriminants are such that the value or object denoted by the @nt has this component. @Defn2{Term=[Constraint_Error],Sec=(raised by failure of run-time check)} @Defn2{Term=[Constraint_Error],Sec=(raised by failure of run-time check)} The exception Constraint_Error is raised if this check fails. @end{RunTime} @begin{Examples} @Leading@keepnext@i(Examples of selected components:) @begin{Example} @tabclear()@tabset(P60) @ChgRef{Version=[2],Kind=[Revised],ARef=[AI95-00252-01],ARef=[AI95-00407-01]} Tomorrow.Month --@RI[ a record component @\(see @RefSecNum{Record Types})] Next_Car.Owner --@RI[ a record component @\(see @RefSecNum{Incomplete Type Declarations})] Next_Car.Owner.Age --@RI[ a record component @\(see @RefSecNum{Incomplete Type Declarations})] --@RI[ the previous two lines involve implicit dereferences] Writer.Unit --@RI[ a record component (a discriminant) @\(see @RefSecNum{Variant Parts and Discrete Choices})] Min_Cell(H).Value --@RI[ a record component of the result @\(see @RefSecNum{Subprogram Declarations})] --@RI[ of the function call Min_Cell(H)] @Chg{Version=[2],New=< Cashier.Append --@RI[ a prefixed view of a procedure @\(see @RefSecNum{Interface Types})] >,Old=<>} Control.Seize --@RI[ an entry of a protected object @\(see @RefSecNum{Protected Units and Protected Objects})] Pool(K).Write --@RI[ an entry of the task Pool(K) @\(see @RefSecNum{Protected Units and Protected Objects})] @end{Example} @begin{Wide} @leading@keepnext@i(Examples of expanded names:) @end{Wide} @begin{Example} @tabclear()@tabset(P67) Key_Manager."<" --@RI[ an operator of the visible part of a package @\(see @RefSecNum{Private Operations})] Dot_Product.Sum --@RI[ a variable declared in a function body @\(see @RefSecNum{Subprogram Declarations})] Buffer.Pool --@RI[ a variable declared in a protected unit @\(see @RefSecNum{Example of Tasking and Synchronization})] Buffer.Read --@RI[ an entry of a protected unit @\(see @RefSecNum{Example of Tasking and Synchronization})] Swap.Temp --@RI[ a variable declared in a block statement @\(see @RefSecNum{Block Statements})] Standard.Boolean --@RI[ the name of a predefined type @\(see @RefSecNum{The Package Standard})] @end{Example} @end{Examples} @begin{Extend83} @Defn{extensions to Ada 83} We now allow an expanded name to use a prefix that denotes a rename of a package, even if the selector is for an entity local to the body or private part of the package, so long as the entity is visible at the place of the reference. This eliminates a preexisting anomaly where references in a package body may refer to declarations of its visible part but not those of its private part or body when the prefix is a rename of the package. @end{Extend83} @begin{DiffWord83} The syntax rule for @nt{selector_name} is new. It is used in places where visibility, but not necessarily direct visibility, is required. See @RefSec{Names} for more information. The description of dereferencing an access type has been moved to @RefSec{Names}; @nt.@key(all) is no longer considered a @nt. The rules have been restated to be consistent with our new terminology, to accommodate class-wide types, etc. @end{DiffWord83} @begin{Extend95} @ChgRef{Version=[2],Kind=[AddedNormal],ARef=[AI95-00252-01]} @ChgAdded{Version=[2],Text=[@Defn{extensions to Ada 95}The prefixed view notation for tagged objects is new. This provides a similar notation to that used in other popular languages, and also reduces the need for @nt{use_clause}s. This is sometimes known as @lquotes@;distinguished receiver notation@rquotes@;. @Defn{distinguished receiver notation}]} @ChgRef{Version=[2],Kind=[AddedNormal]} @ChgAdded{Version=[2],Type=[Leading],Text=[Given the following definitions for a tagged type T:]} @begin{Example} @ChgRef{Version=[2],Kind=[AddedNormal]} @ChgAdded{Version=[2],Text=[@key{procedure} Do_Something (Obj : @key{in out} T; Count : @key{in} Natural); @key{procedure} Do_Something_Else (Obj : @key{access} T; Flag : @key{in} Boolean); My_Object : @key{aliased} T;]} @end{Example} @ChgRef{Version=[2],Kind=[AddedNormal]} @ChgAdded{Version=[2],Type=[Leading],Text=[the following calls are equivalent:]} @begin{Example} @ChgRef{Version=[2],Kind=[AddedNormal]} @ChgAdded{Version=[2],Text=[Do_Something (My_Object, Count => 10); My_Object.Do_Something (Count => 10);]} @end{Example} @ChgRef{Version=[2],Kind=[AddedNormal]} @ChgAdded{Version=[2],Type=[Leading],Text=[as are the following calls:]} @begin{Example} @ChgRef{Version=[2],Kind=[AddedNormal]} @ChgAdded{Version=[2],Text=[Do_Something_Else (My_Object'Access, Flag => True); My_Object.Do_Something_Else (Flag => True);]} @end{Example} @end{Extend95} @LabeledSubClause{Attributes} @begin{Intro} @Defn{attribute} @Redundant[An @i(attribute) is a characteristic of an entity that can be queried via an @nt{attribute_@!reference} or a @nt.] @end{Intro} @begin{Syntax} @Syn{lhs=, rhs="@Syn2{prefix}@SingleQuote@Syn2{attribute_designator}"} @Syn{lhs=,rhs=" @Syn2{identifier}[(@SynI{static_}@Syn2{expression})] | Access | Delta | Digits"} @Syn{lhs=, rhs="@Syn2{prefix}@SingleQuote@Syn2{range_attribute_designator}"} @Syn{lhs=, rhs="Range[(@SynI{static_}@Syn2{expression})]"} @end{Syntax} @begin{Resolution} In an @nt, if the @nt is for an attribute defined for (at least some) objects of an access type, then the @nt is never interpreted as an @nt; otherwise (and for all @nts), if the type of the @nt within the @nt is of an access type, the @nt is interpreted as an @nt. Similarly, if the @nt{attribute_designator} is for an attribute defined for (at least some) functions, then the @nt is never interpreted as a parameterless @nt{function_call}; otherwise (and for all @nts), if the @nt consists of a @nt that denotes a function, it is interpreted as a parameterless @nt. @begin{Discussion} The first part of this rule is essentially a "preference" against implicit dereference, so that it is possible to ask for, say, 'Size of an access object, without automatically getting the size of the object designated by the access object. This rule applies to 'Access, 'Unchecked_Access, 'Size, and 'Address, and any other attributes that are defined for at least some access objects. The second part of this rule implies that, for a parameterless function F, F'Address is the address of F, whereas F'Size is the size of the anonymous constant returned by F. @ChgRef{Version=[1],Kind=[Revised]}@ChgNote{To be consistent with 8652/0006} We normally talk in terms of expected type or profile for name resolution rules, but we don't do this for attributes because certain attributes are legal independent of the type or the profile of the @Chg{New=[@nt{prefix}],Old=[prefix]}. @end{Discussion} @PDefn2{Term=[expected type], Sec=(attribute_designator expression)} @PDefn2{Term=[expected type], Sec=(range_attribute_designator expression)} The @nt{expression}, if any, in an @nt{attribute_designator} or @nt{range_attribute_designator} is expected to be of any integer type. @end{Resolution} @begin{Legality} The @nt{expression}, if any, in an @nt{attribute_designator} or @nt{range_attribute_designator} shall be static. @end{Legality} @begin{StaticSem} An @nt{attribute_reference} denotes a value, an object, a subprogram, or some other kind of program entity. @begin{Ramification} The attributes defined by the language are summarized in @RefSecNum{Language-Defined Attributes}. Implementations can define additional attributes. @end{Ramification} @Redundant[A @nt{range_attribute_reference} X'Range(N) is equivalent to the @nt X'First(N) .. X'Last(N), except that the @nt{prefix} is only evaluated once. Similarly, X'Range is equivalent to X'First .. X'Last, except that the @nt{prefix} is only evaluated once.] @end{StaticSem} @begin{RunTime} @PDefn2{Term=[evaluation], Sec=(attribute_reference)} @PDefn2{Term=[evaluation], Sec=(range_attribute_reference)} The evaluation of an @nt{attribute_reference} (or @nt{range_attribute_reference}) consists of the evaluation of the @nt{prefix}. @end{RunTime} @begin{ImplPerm} @ChgRef{Version=[1],Kind=[Revised],Ref=[8652/0015],ARef=[AI95-00093-01]} An implementation may provide implementation-defined attributes; the @nt{identifier} for an implementation-defined attribute shall differ from those of the language-defined attributes@Chg{New=[ unless supplied for compatibility with a previous edition of this International Standard],Old=[]}. @ImplDef{Implementation-defined attributes.} @begin{Ramification} They cannot be reserved words because reserved words are not legal identifiers. The semantics of implementation-defined attributes, and any associated rules, are, of course, implementation defined. For example, the implementation defines whether a given implementation-defined attribute can be used in a static expression. @ChgRef{Version=[1],Kind=[Added],Ref=[8652/0015],ARef=[AI95-00093-01]} @Chg{New=[Implementations are allowed to support the Small attribute for floating types, as this was defined in Ada 83, even though the name would conflict with a language-defined attribute.],Old=[]} @end{Ramification} @end{ImplPerm} @begin{Notes} Attributes are defined throughout this International Standard, and are summarized in @RefSecNum{Language-Defined Attributes}. @ChgRef{Version=[1],Kind=[Revised]}@ChgNote{To be consistent with 8652/0006} @ChgRef{Version=[2],Kind=[Revised],ARef=[AI95-00235]} In general, the @nt in a @nt of an @nt (or a @nt) has to be resolved without using any context. However, in the case of the Access attribute, the expected type for the @Chg{Version=[2],New=[@nt{attribute_reference}], Old=[@Chg{New=[@nt{prefix}],Old=[prefix]}]} has to be a single access type, and@Chg{Version=[2],New=[],Old=[ if it is an access-to-subprogram type (see @RefSecNum(Operations of Access Types)) then]} the resolution of the @nt can use the fact that the@Chg{Version=[2],New=[ type of the object or the],Old=[]} profile of the callable entity denoted by the @nt has to @Chg{Version=[2],New=[match the designated type or ],Old=[]}be type conformant with the designated profile of the access type. @Defn2{Term=[type conformance],Sec=(required)} @begin(TheProof) @ChgRef{Version=[2],Kind=[Revised],ARef=[AI95-00235]} In the general case, there is no @lquotes@;expected type@rquotes@; for the @nt of an @nt. In the special case of 'Access, there is an @Chg{Version=[2],New=[@lquotes@;expected type@rquotes@; or ], Old=[]}@lquotes@;expected profile@rquotes@; for the @nt. @end(TheProof) @begin(Reason) 'Access is a special case, because without it, it would be very difficult to take 'Access of an overloaded subprogram. @end(Reason) @end{Notes} @begin{Examples} @Leading@keepnext@i(Examples of attributes:) @begin{Example} @tabclear()@tabset(P64) Color'First --@RI[ minimum value of the enumeration type Color @\(see @RefSecNum{Enumeration Types})] Rainbow'Base'First --@RI[ same as Color'First @\(see @RefSecNum{Enumeration Types})] Real'Digits --@RI[ precision of the type Real @\(see @RefSecNum{Floating Point Types})] Board'Last(2) --@RI[ upper bound of the second dimension of Board @\(see @RefSecNum{Index Constraints and Discrete Ranges})] Board'Range(1) --@RI[ index range of the first dimension of Board @\(see @RefSecNum{Index Constraints and Discrete Ranges})] Pool(K)'Terminated --@RI[ True if task Pool(K) is terminated @\(see @RefSecNum{Task Units and Task Objects})] Date'Size --@RI[ number of bits for records of type Date @\(see @RefSecNum{Record Types})] Message'Address --@RI[ address of the record variable Message @\(see @RefSecNum{Discriminant Constraints})] @end{Example} @end{Examples} @begin{Extend83} @Defn{extensions to Ada 83} We now uniformly treat X'Range as X'First..X'Last, allowing its use with scalar subtypes. We allow any integer type in the @SynI{static_}@nt{expression} of an attribute designator, not just a value of @i(universal_integer). The preference rules ensure upward compatibility. @end{Extend83} @begin{DiffWord83} We use the syntactic category @nt{attribute_reference} rather than simply "attribute" to avoid confusing the name of something with the thing itself. The syntax rule for @nt{attribute_reference} now uses @nt{identifier} instead of @nt{simple_name}, because attribute @nt{identifier}s are not required to follow the normal visibility rules. We now separate @nt{attribute_reference} from @nt{range_attribute_reference}, and enumerate the reserved words that are legal attribute or range attribute designators. We do this because @nt{identifier} no longer includes reserved words. The Ada 95 name resolution rules are a bit more explicit than in Ada 83. The Ada 83 rule said that the "meaning of the prefix of an attribute must be determinable independently of the attribute designator and independently of the fact that it is the prefix of an attribute." That isn't quite right since the meaning even in Ada 83 embodies whether or not the prefix is interpreted as a parameterless function call, and in Ada 95, it also embodies whether or not the prefix is interpreted as an implicit_dereference. So the attribute designator does make a difference @em just not much. Note however that if the attribute designator is Access, it makes a big difference in the interpretation of the prefix (see @RefSecNum(Operations of Access Types)). @end{DiffWord83} @begin{DiffWord95} @ChgRef{Version=[2],Kind=[AddedNormal],Ref=[8652/0015],ARef=[AI95-00093-01]} @ChgAdded{Version=[2],Text=[@b The wording was changed to allow implementations to continue to implement the Ada 83 Small attribute. This was always intended to be allowed.]} @ChgRef{Version=[2],Kind=[AddedNormal],ARef=[AI95-00235-01]} @ChgAdded{Version=[2],Text=[The note about resolving prefixes of attributes was updated to reflect that the prefix of an Access attribute now has an expected type (see @RefSecNum{Operations of Access Types}).]} @end{DiffWord95} @LabeledClause{Literals} @begin{Intro} @Redundant[@Defn{literal} A @i(literal) represents a value literally, that is, by means of notation suited to its kind.] A literal is either a @nt, a @nt, the literal @key(null), or a @nt. @IndexSeeAlso{Term=[constant],See=(literal)} @begin(Discussion) An enumeration literal that is an @nt rather than a @nt is not considered a @i(literal) in the above sense, because it involves no special notation @lquotes@;suited to its kind.@rquotes@; It might more properly be called an @nt, except for historical reasons. @end(Discussion) @end{Intro} @begin{Resolution} @ChgRef{Version=[2],Kind=[Deleted],ARef=[AI95-00230-01]} @ChgDeleted{Version=[2],Text=[@PDefn2{Term=[expected type],Sec=(null literal)} The expected type for a literal @key(null) shall be a single access type.]} @begin{Discussion} @ChgRef{Version=[2],Kind=[Deleted]} @ChgDeleted{Version=[2],Text=[This new wording ("expected type ... shall be a single ... type") replaces the old "shall be determinable" stuff. It reflects an attempt to simplify and unify the description of the rules for resolving aggregates, literals, type conversions, etc. See @RefSec{The Context of Overload Resolution} for the details.]} @end{Discussion} @PDefn2{Term=[expected type],Sec=(character_literal)} @PDefn2{Term=[expected profile],Sec=(character_literal)} For a @nt that consists of a @nt, either its expected type shall be a single character type, in which case it is interpreted as a parameterless @nt that yields the corresponding value of the character type, or its expected profile shall correspond to a parameterless function with a character result type, in which case it is interpreted as the name of the corresponding parameterless function declared as part of the character type's definition (see @RefSecNum(Enumeration Types)). In either case, the @nt{character_literal} denotes the @nt{enumeration_literal_specification}. @begin{Discussion} See @RefSecNum(Selected Components) for the resolution rules for a @nt that is a @nt. @end{Discussion} @PDefn2{Term=[expected type],Sec=(string_literal)} The expected type for a @nt{primary} that is a @nt shall be a single string type. @end{Resolution} @begin{Legality} A @nt{character_literal} that is a @nt shall correspond to a @nt of the expected type, or of the result type of the expected profile. For each character of a @nt{string_literal} with a given expected string type, there shall be a corresponding @nt of the component type of the expected string type. @ChgRef{Version=[2],Kind=[Deleted],ARef=[AI95-00230-01],ARef=[AI95-00231-01]} @ChgDeleted{Version=[2],Text=[A literal @nt shall not be of an anonymous access type@Redundant[, since such types do not have a null value (see @RefSecNum{Access Types})].]} @begin{Reason} @ChgRef{Version=[2],Kind=[Deleted]} @ChgDeleted{Version=[2],Text=[This is a legality rule rather than an overloading rule, to simplify implementations.]} @end{Reason} @end{Legality} @begin{StaticSem} @ChgRef{Version=[2],Kind=[Revised],ARef=[AI95-00230-01]} An integer literal is of type @i{universal_integer}. A real literal is of type @i{universal_real}.@Chg{Version=[2],New=[ The literal @key is of type @i.],Old=[]} @end{StaticSem} @begin{RunTime} @PDefn2{Term=[evaluation], Sec=(numeric literal)} @PDefn2{Term=[evaluation], Sec=(null literal)} @Defn{null access value} @IndexSee{Term=[null pointer],See=(null access value)} The evaluation of a numeric literal, or the literal @key(null), yields the represented value. @PDefn2{Term=[evaluation], Sec=(string_literal)} The evaluation of a @nt{string_literal} that is a @nt yields an array value containing the value of each character of the sequence of characters of the @nt, as defined in @RefSecNum{String Literals}. The bounds of this array value are determined according to the rules for @nts (see @RefSecNum{Array Aggregates}), except that for a null string literal, the upper bound is the predecessor of the lower bound. @IndexCheck{Range_Check} For the evaluation of a @nt of type @i(T), a check is made that the value of each character of the @nt belongs to the component subtype of @i(T). For the evaluation of a null string literal, a check is made that its lower bound is greater than the lower bound of the base range of the index type. @Defn2{Term=[Constraint_Error],Sec=(raised by failure of run-time check)} The exception Constraint_Error is raised if either of these checks fails. @begin{Ramification} The checks on the characters need not involve more than two checks altogether, since one need only check the characters of the string with the lowest and highest position numbers against the range of the component subtype. @end{Ramification} @end{RunTime} @begin{Notes} Enumeration literals that are @nts rather than @nts follow the normal rules for @nts when used in a @nt (see @RefSecNum{Names} and @RefSecNum{Selected Components}). @nts used as @nts follow the normal rules for expanded names (see @RefSecNum{Selected Components}). @end{Notes} @begin{Examples} @Leading@keepnext@i(Examples of literals:) @begin{Example} @tabclear()@tabset(P16) 3.14159_26536 @\--@RI[ a real literal] 1_345 @\--@RI[ an integer literal] 'A' @\--@RI[ a character literal] "Some Text" @\--@RI[ a string literal ] @end{Example} @end{Examples} @begin{Incompatible83} @Defn{incompatibilities with Ada 83} Because @nts are now treated like other literals, in that they are resolved using context rather than depending on direct visibility, additional qualification might be necessary when passing a @nt to an overloaded subprogram. @end{Incompatible83} @begin{Extend83} @Defn{extensions to Ada 83} @nts are now treated analogously to @key(null) and @nts, in that they are resolved using context, rather than their content; the declaration of the corresponding @nt need not be directly visible. @end{Extend83} @begin{DiffWord83} Name Resolution rules for enumeration literals that are not @nts are not included anymore, since they are neither syntactically nor semantically "literals" but are rather names of parameterless functions. @end{DiffWord83} @begin{Extend95} @ChgRef{Version=[2],Kind=[AddedNormal],ARef=[AI95-00230-01],ARef=[AI95-00231-01]} @ChgAdded{Version=[2],Text=[@Defn{extensions to Ada 95}@key{Null} now has type @i, which is similar to other literals. @key{Null} can be used with anonymous access types.]} @end{Extend95} @LabeledClause{Aggregates} @begin{Intro} @Redundant[@Defn{aggregate} An @i(aggregate) combines component values into a composite value of an array type, record type, or record extension.] @IndexSeeAlso{Term={literal},See=(aggregate)} @end{Intro} @begin{Syntax} @Syn{lhs=,rhs="@Syn2{record_aggregate} | @Syn2{extension_aggregate} | @Syn2{array_aggregate}"} @end{Syntax} @begin{Resolution} @ChgRef{Version=[2],Kind=[Revised],ARef=[AI95-00287-01]} @PDefn2{Term=[expected type],Sec=(aggregate)} The expected type for an @nt{aggregate} shall be a single @Chg{Version=[2],New=[],Old=[nonlimited ]}array type, record type, or record extension. @begin{Discussion} See @RefSec{The Context of Overload Resolution} for the meaning of @lquotes@;shall be a single ... type.@rquotes@; @end{Discussion} @end{Resolution} @begin{Legality} An @nt{aggregate} shall not be of a class-wide type. @begin{Ramification} When the expected type in some context is class-wide, an aggregate has to be explicitly qualified by the specific type of value to be created, so that the expected type for the aggregate itself is specific. @end{Ramification} @begin{Discussion} We used to disallow @nts of a type with unknown discriminants. However, that was unnecessarily restrictive in the case of an extension aggregate, and irrelevant to a record aggregate (since a type that is legal for a record aggregate could not possibly have unknown discriminants) and to an array aggregate (the only specific types that can have unknown discriminants are private types, private extensions, and types derived from them). @end{Discussion} @end{Legality} @begin{RunTime} @PDefn2{Term=[evaluation], Sec=(aggregate)} For the evaluation of an @nt, an anonymous object is created and values for the components or ancestor part are obtained (as described in the subsequent subclause for each kind of the @nt) and assigned into the corresponding components or ancestor part of the anonymous object. @Defn2{Term=[assignment operation], Sec=(during evaluation of an @nt{aggregate})} Obtaining the values and the assignments occur in an arbitrary order. The value of the @nt{aggregate} is the value of this object. @begin{Discussion} The ancestor part is the set of components inherited from the ancestor type. The syntactic category @nt is the @nt or @nt that specifies how the ancestor part of the anonymous object should be initialized. @end{Discussion} @begin{Ramification} The assignment operations do the necessary value adjustment, as described in @RefSecNum{User-Defined Assignment and Finalization}. Note that the value as a whole is not adjusted @em just the subcomponents (and ancestor part, if any). @RefSecNum{User-Defined Assignment and Finalization} also describes when this anonymous object is finalized. If the @nt is a @nt the Initialize procedure for the ancestor type is applied to the ancestor part after default-initializing it, unless the procedure is abstract, as described in @RefSecNum{User-Defined Assignment and Finalization}. The Adjust procedure for the ancestor type is not called in this case, since there is no assignment to the ancestor part as a whole. @end{Ramification} @IndexCheck{Discriminant_Check} If an @nt{aggregate} is of a tagged type, a check is made that its value belongs to the first subtype of the type. @Defn2{Term=[Constraint_Error],Sec=(raised by failure of run-time check)} Constraint_Error is raised if this check fails. @begin{Ramification} This check ensures that no values of a tagged type are ever outside the first subtype, as required for inherited dispatching operations to work properly (see @RefSecNum(Derived Types and Classes)). This check will always succeed if the first subtype is unconstrained. This check is not extended to untagged types to preserve upward compatibility. @end{Ramification} @end{RunTime} @begin{Extend83} @Defn{extensions to Ada 83} We now allow @nt{extension_aggregate}s. @end{Extend83} @begin{DiffWord83} We have adopted new wording for expressing the rule that the type of an aggregate shall be determinable from the outside, though using the fact that it is nonlimited record (extension) or array. An @nt{aggregate} now creates an anonymous object. This is necessary so that controlled types will work (see @RefSecNum{User-Defined Assignment and Finalization}). @end{DiffWord83} @begin{Incompatible95} @ChgRef{Version=[2],Kind=[AddedNormal],ARef=[AI95-00287-01]} @ChgAdded{Version=[2],Type=[Leading],Text=[@Defn{incompatibilities with Ada 95} In Ada 95, a limited type is not considered when resolving an @nt{aggregate}. Since Ada 2005 now allows limited @nt{aggregate}s, we can have incompatibilities. For example:]} @begin{Example} @ChgRef{Version=[2],Kind=[AddedNormal]} @Chg{Version=[2],New=[@key{type} Lim @key{is} @key{limited} @key{record} Comp: Integer; @key{end} @key{record};],Old=[]} @ChgRef{Version=[2],Kind=[AddedNormal]} @Chg{Version=[2],New=[@key{type} Not_Lim @key{is} @key{record} Comp: Integer; @key{end} @key{record};],Old=[]} @ChgRef{Version=[2],Kind=[AddedNormal]} @Chg{Version=[2],New=[@key{procedure} P(X: Lim); @key{procedure} P(X: Not_Lim);],Old=[]} @ChgRef{Version=[2],Kind=[AddedNormal]} @ChgAdded{Version=[2],Text=[P((Comp => 123)); -- @RI[Illegal in Ada 2005, legal in Ada 95]]} @end{Example} @ChgRef{Version=[2],Kind=[AddedNormal]} @ChgAdded{Version=[2],Text=[The call to P is ambiguous in Ada 2005, while it would not be ambiguous in Ada 95 as the @nt{aggregate} could not have a limited type. Qualifying the @nt{aggregate} will eliminate any ambiguity. This construction would be rather confusing to a maintenance programmer, so it should be avoided, and thus we expect it to be rare.]} @end{Incompatible95} @begin{Extend95} @ChgRef{Version=[2],Kind=[AddedNormal],ARef=[AI95-00287-01]} @ChgAdded{Version=[2],Text=[@Defn{extensions to Ada 95}@nt{Aggregate}s can be of a limited type.]} @end{Extend95} @LabeledSubClause{Record Aggregates} @begin{Intro} @Redundant[In a @nt, a value is specified for each component of the record or record extension value, using either a named or a positional association.] @end{Intro} @begin{Syntax} @Syn{lhs=,rhs="(@Syn2{record_component_association_list})"} @Syn{lhs=,rhs=" @Syn2{record_component_association} {, @Syn2{record_component_association}} | @key"} @ChgRef{Version=[2],Kind=[Revised],ARef=[AI95-00287-01]} @Syn{lhs=,rhs=" [@Syn2{component_choice_list} =>] @Syn2{expression}@Chg{Version=[2],New=[ | @Syn2{component_choice_list} => <>],Old=[]}"} @Syn{lhs=,rhs=" @SynI{component_}@Syn2{selector_name} {| @SynI{component_}@Syn2{selector_name}} | @key{others}"} @begin(SyntaxText) @Defn{named component association} A @nt is a @i(named component association) if it has a @nt; @Defn{positional component association} otherwise, it is a @i(positional component association). Any positional component associations shall precede any named component associations. If there is a named association with a @nt of @key(others), it shall come last. @begin{Discussion} These rules were implied by the BNF in an early version of the RM9X, but it made the grammar harder to read, and was inconsistent with how we handle discriminant constraints. Note that for array aggregates we still express some of the rules in the grammar, but array aggregates are significantly different because an array aggregate is either all positional (with a possible @key(others) at the end), or all named. @end{Discussion} In the @nt for a @nt, if there is only one association, it shall be a named association. @begin{Reason} Otherwise the construct would be interpreted as a parenthesized expression. This is considered a syntax rule, since it is relevant to overload resolution. We choose not to express it with BNF so we can share the definition of @nt in both @nt and @nt. @end{Reason} @begin{Ramification} The @nt of an @nt does not have such a restriction. @end{Ramification} @end(SyntaxText) @end{Syntax} @begin{Resolution} @ChgRef{Version=[2],Kind=[Revised],ARef=[AI95-00287-01]} @PDefn2{Term=[expected type],Sec=(record_aggregate)} The expected type for a @nt{record_aggregate} shall be a single @Chg{Version=[2],New=[],Old=[nonlimited ]}record type or record extension. @begin{Ramification} This rule is used to resolve whether an @nt{aggregate} is an @nt{array_aggregate} or a @nt{record_aggregate}. The presence of a @key(with) is used to resolve between a @nt{record_aggregate} and an @nt{extension_aggregate}. @end{Ramification} @Defn2{Term=[needed component], Sec=(@nt @nt)} For the @nt of a @nt, all components of the composite value defined by the aggregate are @i(needed)@Redundant[; for the association list of an @nt, only those components not determined by the ancestor expression or subtype are needed (see @RefSecNum{Extension Aggregates}).] Each @nt{selector_@!name} in a @nt{record_@!component_@!association} shall denote a needed component @Redundant[(including possibly a discriminant)]. @begin{Ramification} For the association list of a @nt{record_aggregate}, @lquotes@;needed components@rquotes@; includes every component of the composite value, but does not include those in unchosen @nt{variant}s (see AI83-309). If there are @nts, then the value specified for the discriminant that governs them determines which @nt is chosen, and hence which components are needed. If an extension defines a new @nt{known_discriminant_part}, then all of its discriminants are needed in the component association list of an extension aggregate for that type, even if the discriminants have the same names and types as discriminants of the type of the ancestor expression. This is necessary to ensure that the positions in the @nt are well defined, and that discriminants that govern @nt{variant_part}s can be given by static expressions. @end{Ramification} @Leading@Keepnext@PDefn2{Term=[expected type], Sec=(record_component_association expression)} The expected type for the @nt of a @nt is the type of the @i(associated) component(s); @Defn2{Term=[associated components], Sec=(of a @nt)} the associated component(s) are as follows: @begin(itemize) For a positional association, the component @Redundant[(including possibly a discriminant)] in the corresponding relative position (in the declarative region of the type), counting only the needed components; @begin{Ramification} This means that for an association list of an @nt, only noninherited components are counted to determine the position. @end{Ramification} For a named association with one or more @i(component_)@nts, the named component(s); For a named association with the reserved word @key(others), all needed components that are not associated with some previous association. @end(itemize) @end{Resolution} @begin{Legality} If the type of a @nt{record_aggregate} is a record extension, then it shall be a descendant of a record type, through one or more record extensions (and no private extensions). If there are no components needed in a given @nt, then the reserved words @key(null record) shall appear rather than a list of @nts. @begin{Ramification} For example, "(@key(null record))" is a @nt for a null record type. Similarly, "(T'(A) @key(with null record))" is an @nt for a type defined as a null record extension of T. @end{Ramification} @ChgRef{Version=[2],Kind=[Revised],ARef=[AI95-00287-01]} Each @nt@Chg{Version=[2],New=[ other than an @key{others} choice with a <>],Old=[]} shall have at least one associated component, and each needed component shall be associated with exactly one @nt. If a @nt @Chg{Version=[2],New=[with an @nt{expression} ],Old=[]}has two or more associated components, all of them shall be of the same type. @begin{Ramification} @ChgRef{Version=[2],Kind=[Revised],ARef=[AI95-00287-01]} These rules apply to an association with an @key(others) choice@Chg{Version=[2],New=[ with an expression. An @key(others) choice with a <> can match zero components or several components with different types.],Old=[]}. @end{Ramification} @begin{Reason} @ChgRef{Version=[2],Kind=[Revised],ARef=[AI95-00287-01]} Without these rules, there would be no way to know what was the expected type for the @nt of the association. @Chg{Version=[2],New=[Note that some of the rules do not apply to <> associations, as we do not need to resolve anything. We allow @key{others} => <> to match no components as this is similar to array aggregates. That means that (@key{others} => <>) always represents a default-initialized record or array value.],Old=[]} @end{Reason} @begin{Discussion} AI83-00244 also requires that the @nt{expression} shall be legal for each associated component. This is because even though two components have the same type, they might have different subtypes. Therefore, the legality of the @nt, particularly if it is an array aggregate, might differ depending on the associated component's subtype. However, we have relaxed the rules on array aggregates slightly for Ada 95, so the staticness of an applicable index constraint has no effect on the legality of the array aggregate to which it applies. See @RefSecNum{Array Aggregates}. This was the only case (that we know of) where a subtype provided by context affected the legality of an @nt{expression}. @end{Discussion} @begin{Ramification} The rule that requires at least one associated component for each @nt implies that there can be no extra associations for components that don't exist in the composite value, or that are already determined by the ancestor expression or subtype of an @nt. The second part of the first sentence ensures that no needed components are left out, nor specified twice. @end{Ramification} If the components of a @nt{variant_part} are needed, then the value of a discriminant that governs the @nt{variant_part} shall be given by a static expression. @begin{Ramification} This expression might either be given within the aggregate itself, or in a constraint on the parent subtype in a @nt for some ancestor of the type of the aggregate. @end{Ramification} @ChgRef{Version=[2],Kind=[Added],ARef=[AI95-00287-01]} @ChgAdded{Version=[2],Text=[A @nt for a discriminant without a @nt shall have an @nt rather than <>.]} @begin{Reason} @ChgRef{Version=[2],Kind=[AddedNormal]} @ChgAdded{Version=[2],Text=[A discriminant must always have a defined value, but <> means uninitialized for a discrete type unless the component has a default value.]} @end{Reason} @end{Legality} @begin{RunTime} @PDefn2{Term=[evaluation], Sec=(record_aggregate)} The evaluation of a @nt consists of the evaluation of the @nt. @PDefn2{Term=[evaluation], Sec=(record_component_association_list)} For the evaluation of a @nt{record_@!component_@!association_@!list}, any per-object constraints (see @RefSecNum(Record Types)) for components specified in the association list are elaborated and any @nts are evaluated and converted to the subtype of the associated component. @PDefn2{Term=[implicit subtype conversion],Sec=(expressions in aggregate)} Any constraint elaborations and @nt{expression} evaluations (and conversions) occur in an arbitrary order, except that the @nt for a discriminant is evaluated (and converted) prior to the elaboration of any per-object constraint that depends on it, which in turn occurs prior to the evaluation and conversion of the @nt{expression} for the component with the per-object constraint. @begin{Ramification} The conversion in the first rule might raise Constraint_Error. @end{Ramification} @begin{Discussion} This check in the first rule presumably happened as part of the dependent compatibility check in Ada 83. @end{Discussion} @ChgRef{Version=[2],Kind=[Added],ARef=[AI95-00287-01]} @ChgAdded{Version=[2],Text=[For a @nt with an @nt, the @nt defines the value for the associated component(s). For a @nt with <>, if the @nt has a @nt, that @nt defines the value for the associated component(s); otherwise, the associated component(s) are initialized by default as for a stand-alone object of the component subtype (see @RefSecNum{Object Declarations}).]} The @nt of a @nt{record_component_association} is evaluated (and converted) once for each associated component. @end{RunTime} @begin{Notes} For a @nt with positional associations, expressions specifying discriminant values appear first since the @nt is given first in the declaration of the type; they have to be in the same order as in the @nt. @end{Notes} @begin{Examples} @Leading@keepnext@i(Example of a record aggregate with positional associations:) @begin{Example} (4, July, 1776) --@RI[ see @RefSecNum{Record Types} ] @end{Example} @begin{Wide} @leading@keepnext@i(Examples of record aggregates with named associations:) @end{Wide} @begin{Example} (Day => 4, Month => July, Year => 1776) (Month => July, Day => 4, Year => 1776) (Disk, Closed, Track => 5, Cylinder => 12) --@RI[ see @RefSecNum{Variant Parts and Discrete Choices}] (Unit => Disk, Status => Closed, Cylinder => 9, Track => 1) @end{Example} @begin{Wide} @leading@keepnext@ChgRef{Version=[2],Kind=[Revised],ARef=[AI95-00287-01]} @i(Example@Chg{Version=[2],New=[s],Old=[]} of component association with several choices:) @end{Wide} @begin{Example} @tabclear()@tabset(P50) (Value => 0, Succ|Pred => @key(new) Cell'(0, @key(null), @key(null))) @\--@RI[ see @RefSecNum{Incomplete Type Declarations}] --@RI[ The allocator is evaluated twice: Succ and Pred designate different cells] @ChgRef{Version=[2],Kind=[Added]} @Chg{Version=[2],New=[(Value => 0, Succ|Pred => <>) @\--@RI[ see @RefSecNum{Incomplete Type Declarations}]],Old=[]} @ChgRef{Version=[2],Kind=[Added]} @Chg{Version=[2],New=[ --@RI[ Succ and Pred will be set to @key{null}]],Old=[]} @end{Example} @begin{Wide} @leading@keepnext@i{Examples of record aggregates for tagged types (see @RefSecNum(Tagged Types and Type Extensions) and @RefSecNum{Type Extensions}):} @end{Wide} @begin{Example} Expression'(@key{null record}) Literal'(Value => 0.0) Painted_Point'(0.0, Pi/2.0, Paint => Red) @end{Example} @end{Examples} @begin{Extend83} @Defn{extensions to Ada 83} Null record aggregates may now be specified, via "(@key(null record))". However, this syntax is more useful for null record extensions in extension aggregates. @end{Extend83} @begin{DiffWord83} Various AIs have been incorporated (AI83-00189, AI83-00244, and AI83-00309). In particular, Ada 83 did not explicitly disallow extra values in a record aggregate. Now we do. @end{DiffWord83} @begin{Extend95} @ChgRef{Version=[2],Kind=[AddedNormal],ARef=[AI95-00287-01]} @ChgAdded{Version=[2],Text=[@Defn{extensions to Ada 95}<> can be used in place of an @nt{expression} in a @nt{record_aggregate}, default initializing the component.]} @end{Extend95} @begin{DiffWord95} @ChgRef{Version=[2],Kind=[AddedNormal],ARef=[AI95-00287-01]} @ChgAdded{Version=[2],Text=[Limited @nt{record_aggregate}s are allowed (since all kinds of aggregates can now be limited, see @RefSecNum{Aggregates}).]} @end{DiffWord95} @LabeledSubClause{Extension Aggregates} @begin{Intro} @Redundant[An @nt specifies a value for a type that is a record extension by specifying a value or subtype for an ancestor of the type, followed by associations for any components not determined by the @nt.] @end{Intro} @begin{MetaRules} The model underlying this syntax is that a record extension can also be viewed as a regular record type with an ancestor "prefix." The @nt corresponds to exactly what would be needed if there were no ancestor/prefix type. The @nt{ancestor_part} determines the value of the ancestor/prefix. @end{MetaRules} @begin{Syntax} @Syn{lhs=,rhs=" (@Syn2{ancestor_part} @key(with) @Syn2{record_component_association_list})"} @Syn{lhs=, rhs="@Syn2{expression} | @Syn2{subtype_mark}"} @end{Syntax} @begin{Resolution} @ChgRef{Version=[2],Kind=[Revised],ARef=[AI95-00287-01]} @PDefn2{Term=[expected type], Sec=(extension_aggregate)} The expected type for an @nt{extension_aggregate} shall be a single @Chg{Version=[2],New=[],Old=[nonlimited ]}type that is a record extension. @PDefn2{Term=[expected type], Sec=(extension_aggregate ancestor expression)} If the @nt is an @nt, it is expected to be of any @Chg{Version=[2],New=[],Old=[nonlimited ]}tagged type. @begin{Reason} We could have made the expected type @i(T')Class where @i(T) is the ultimate ancestor of the type of the aggregate, or we could have made it even more specific than that. However, if the overload resolution rules get too complicated, the implementation gets more difficult and it becomes harder to produce good error messages. @end{Reason} @end{Resolution} @begin{Legality} @ChgRef{Version=[2],Kind=[Revised],ARef=[AI95-00306-01]} If the @nt is a @nt, it shall denote a specific tagged subtype. @Chg{Version=[2],New=[If the @nt{ancestor_part} is an @nt{expression}, it shall not be dynamically tagged. ],Old=[]} The type of the @nt{extension_aggregate} shall be derived from the type of the @nt, through one or more record extensions (and no private extensions). @begin{Reason} @ChgRef{Version=[2],Kind=[AddedNormal],ARef=[AI95-00306-01]} @ChgAdded{Version=[2],Text=[The expression cannot be dynamically tagged to prevent implicit "truncation" of a dynamically-tagged value to the specific ancestor type. This is similar to the rules in @RefSecNum{Dispatching Operations of Tagged Types}.]} @end{Reason} @end{Legality} @begin{StaticSem} @Defn2{Term=[needed component], Sec=(@nt @nt)} For the @nt{record_@!component_@!association_@!list} of an @nt{extension_@!aggregate}, the only components @i(needed) are those of the composite value defined by the aggregate that are not inherited from the type of the @nt, plus any inherited discriminants if the @nt is a @nt that denotes an unconstrained subtype. @end{StaticSem} @begin{RunTime} @PDefn2{Term=[evaluation], Sec=(extension_aggregate)} For the evaluation of an @nt{extension_aggregate}, the @nt{record_@!component_@!association_@!list} is evaluated. If the @nt is an @nt, it is also evaluated; if the @nt is a @nt, the components of the value of the aggregate not given by the @nt are initialized by default as for an object of the ancestor type. Any implicit initializations or evaluations are performed in an arbitrary order, except that the @nt for a discriminant is evaluated prior to any other evaluation or initialization that depends on it. @IndexCheck{Discriminant_Check} If the type of the @nt has discriminants that are not inherited by the type of the @nt{extension_aggregate}, then, unless the @nt is a @nt that denotes an unconstrained subtype, a check is made that each discriminant of the ancestor has the value specified for a corresponding discriminant, either in the @nt{record_@!component_@!association_@!list}, or in the @nt for some ancestor of the type of the @nt{extension_aggregate}. @Defn2{Term=[Constraint_Error],Sec=(raised by failure of run-time check)} Constraint_Error is raised if this check fails. @begin{Ramification} Corresponding and specified discriminants are defined in @RefSecNum{Discriminants}. The rules requiring static compatibility between new discriminants of a derived type and the parent discriminant(s) they constrain ensure that at most one check is required per discriminant of the ancestor expression. @end{Ramification} @end{RunTime} @begin{Notes} If all components of the value of the @nt are determined by the @nt, then the @nt is required to be simply @key(null record). If the @nt is a @nt, then its type can be abstract. If its type is controlled, then as the last step of evaluating the aggregate, the Initialize procedure of the ancestor type is called, unless the Initialize procedure is abstract (see @RefSecNum{User-Defined Assignment and Finalization}). @end{Notes} @begin{Examples} @Leading@keepnext@i{Examples of extension aggregates (for types defined in @RefSecNum{Type Extensions}):} @begin(example) Painted_Point'(Point @key{with} Red) (Point'(P) @key{with} Paint => Black) (Expression @key{with} Left => 1.2, Right => 3.4) Addition'(Binop @key{with null record}) --@RI[ presuming Binop is of type Binary_Operation] @end(example) @end{Examples} @begin{Extend83} @Defn{extensions to Ada 83} The extension aggregate syntax is new. @end{Extend83} @begin{DiffWord95} @ChgRef{Version=[2],Kind=[AddedNormal],ARef=[AI95-00287-01]} @ChgAdded{Version=[2],Text=[Limited @nt{extension_aggregate}s are allowed (since all kinds of aggregates can now be limited, see @RefSecNum{Aggregates}).]} @ChgRef{Version=[2],Kind=[AddedNormal],ARef=[AI95-00306-01]} @ChgAdded{Version=[2],Text=[Eliminated implicit @lquotes@;truncation@rquotes of a dynamically tagged value when it is used as an ancestor @nt{expression}.]} @end{DiffWord95} @LabeledSubClause{Array Aggregates} @begin{Intro} @Redundant[In an @nt, a value is specified for each component of an array, either positionally or by its index.] For a @nt{positional_array_aggregate}, the components are given in increasing-index order, with a final @key[others], if any, representing any remaining components. For a @nt{named_array_aggregate}, the components are identified by the values covered by the @nt{discrete_choice}s. @end{Intro} @begin{MetaRules} @ChgRef{Version=[1],Kind=[Revised]} The rules in this subclause are based on terms and rules for @nt{discrete_choice_list}s defined in @RefSec{Variant Parts and Discrete Choices}. @Chg{New=[For example, the requirements that @key(others) come last and stand alone are found there.],Old=[]}@Comment{This question is asked periodically, so we answer it explicitly.} @end{MetaRules} @begin{Syntax} @Syn{lhs=,rhs=" @Syn2{positional_array_aggregate} | @Syn2{named_array_aggregate}"} @ChgRef{Version=[2],Kind=[Revised],ARef=[AI95-00287-01]} @Syn{lhs=,rhs=" (@Syn2{expression}, @Syn2{expression} {, @Syn2{expression}}) | (@Syn2{expression} {, @Syn2{expression}}, @key(others) => @Syn2{expression})@Chg{Version=[2],New=[ | (@Syn2{expression} {, @Syn2{expression}}, @key(others) => <>)],Old=[]}"} @Syn{lhs=,rhs=" (@Syn2{array_component_association} {, @Syn2{array_component_association}})"} @ChgRef{Version=[2],Kind=[Revised],ARef=[AI95-00287-01]} @Syn{lhs=,rhs=" @Syn2{discrete_choice_list} => @Syn2{expression}@Chg{Version=[2],New=[ | @Syn2{discrete_choice_list} => <>],Old=[]}"} @end{Syntax} @begin{Intro} @Defn{n-dimensional @nt} An @i(n-dimensional) @nt is one that is written as n levels of nested @nt{array_aggregate}s (or at the bottom level, equivalent @nt{string_literal}s). @Defn2{Term=[subaggregate], Sec=(of an @nt{array_aggregate})} For the multidimensional case (n >= 2) the @nts (or equivalent @nts) at the n@en@;1 lower levels are called @i(subaggregate)s of the enclosing n-dimensional @nt. @Defn{array component expression} The @nts of the bottom level subaggregates (or of the @nt itself if one-dimensional) are called the @i(array component expressions) of the enclosing n-dimensional @nt. @begin(Ramification) Subaggregates do not have a type. They correspond to part of an array. For example, with a matrix, a subaggregate would correspond to a single row of the matrix. The definition of "n-dimensional" @nt applies to subaggregates as well as @nts that have a type. @end(Ramification) @begin(Honest) @Defn{others choice} An @i(@key(others) choice) is the reserved word @key(others) as it appears in a @nt{positional_array_aggregate} or as the @nt{discrete_choice} of the @nt{discrete_choice_list} in an @nt{array_component_association}. @end(Honest) @end{Intro} @begin{Resolution} @ChgRef{Version=[2],Kind=[Revised],ARef=[AI95-00287-01]} @PDefn2{Term=[expected type], Sec=(array_aggregate)} The expected type for an @nt{array_aggregate} (that is not a subaggregate) shall be a single @Chg{Version=[2],New=[],Old=[nonlimited ]}array type. @PDefn2{Term=[expected type], Sec=(array_aggregate component expression)} The component type of this array type is the expected type for each array component expression of the @nt. @begin{Ramification} @ChgRef{Version=[2],Kind=[Revised],ARef=[AI95-00287-01]} We already require a single array or record type or record extension for an @nt{aggregate}. The above rule requiring a single @Chg{Version=[2],New=[], Old=[nonlimited ]}array type (and similar ones for record and extension aggregates) resolves which kind of aggregate you have. @end{Ramification} @PDefn2{Term=[expected type], Sec=(array_aggregate discrete_choice)} The expected type for each @nt{discrete_choice} in any @nt{discrete_choice_list} of a @nt{named_array_aggregate} is the type of the @i(corresponding index); @Defn2{Term=[corresponding index], Sec=(for an @nt{array_aggregate})} the corresponding index for an @nt that is not a subaggregate is the first index of its type; for an (n@en@;m)-dimensional subaggregate within an @nt of an n-dimensional type, the corresponding index is the index in position m+1. @end{Resolution} @begin{Legality} An @nt of an n-dimensional array type shall be written as an n-dimensional @nt. @begin(Ramification) In an m-dimensional @nt @Redundant[(including a subaggregate)], where m >= 2, each of the @nts has to be an (m@en@;1)-dimensional subaggregate. @end(Ramification) @Leading@;An @key(others) choice is allowed for an @nt only if an @i(applicable index constraint) applies to the @nt{array_aggregate}. @Defn{applicable index constraint} @Redundant[An applicable index constraint is a constraint provided by certain contexts where an @nt{array_aggregate} is permitted that can be used to determine the bounds of the array value specified by the aggregate.] Each of the following contexts (and none other) defines an applicable index constraint: @begin(itemize) @ChgRef{Version=[2],Kind=[Revised],ARef=[AI-00318-02]} For an @nt{explicit_actual_parameter}, an @nt{explicit_generic_actual_parameter}, the @nt{expression} of a @Chg{Version=[2],New=[return statement],Old=[@nt{return_statement}]}, the initialization expression in an @nt{object_@!declaration}, or a @nt{default_@!expression} @Redundant[(for a parameter or a component)], when the nominal subtype of the corresponding formal parameter, generic formal parameter, function @Chg{Version=[2],New=[return object],Old=[result]}, object, or component is a constrained array subtype, the applicable index constraint is the constraint of the subtype; For the @nt{expression} of an @nt{assignment_statement} where the @nt{name} denotes an array variable, the applicable index constraint is the constraint of the array variable; @begin{Reason} This case is broken out because the constraint comes from the actual subtype of the variable (which is always constrained) rather than its nominal subtype (which might be unconstrained). @end{Reason} For the operand of a @nt{qualified_expression} whose @nt{subtype_mark} denotes a constrained array subtype, the applicable index constraint is the constraint of the subtype; For a component @nt{expression} in an @nt{aggregate}, if the component's nominal subtype is a constrained array subtype, the applicable index constraint is the constraint of the subtype; @begin{Discussion} Here, the @nt{array_aggregate} with @key[others] is being used within a larger aggregate. @end{Discussion} For a parenthesized @nt{expression}, the applicable index constraint is that, if any, defined for the @nt{expression}. @begin{Discussion} RM83 omitted this case, presumably as an oversight. We want to minimize situations where an @nt{expression} becomes illegal if parenthesized. @end{Discussion} @end(itemize) The applicable index constraint @i(applies) to an @nt{array_aggregate} that appears in such a context, as well as to any subaggregates thereof. In the case of an @nt (or @nt) for a call on a generic formal subprogram, no applicable index constraint is defined. @begin(Reason) This avoids generic contract model problems, because only mode conformance is required when matching actual subprograms with generic formal subprograms. @end(Reason) The @nt{discrete_choice_list} of an @nt{array_component_association} is allowed to have a @nt{discrete_choice} that is a nonstatic @nt or that is a @nt{discrete_range} that defines a nonstatic or null range, only if it is the single @nt{discrete_choice} of its @nt{discrete_choice_list}, and there is only one @nt{array_component_association} in the @nt. @begin{Discussion} We now allow a nonstatic @key(others) choice even if there are other array component expressions as well. @end{Discussion} In a @nt with more than one @nt, no two @nts are allowed to cover the same value (see @RefSecNum{Variant Parts and Discrete Choices}); if there is no @key[others] choice, the @nts taken together shall exactly cover a contiguous sequence of values of the corresponding index type. @begin{Ramification} This implies that each component must be specified exactly once. See AI83-309. @end{Ramification} A bottom level subaggregate of a multidimensional @nt of a given array type is allowed to be a @nt only if the component type of the array type is a character type; each character of such a @nt{string_literal} shall correspond to a @nt of the component type. @end{Legality} @begin{StaticSem} A subaggregate that is a @nt is equivalent to one that is a @nt of the same length, with each @nt being the @nt for the corresponding character of the @nt. @end{StaticSem} @begin{RunTime} @Leading@PDefn2{Term=[evaluation], Sec=(array_aggregate)} The evaluation of an @nt{array_aggregate} of a given array type proceeds in two steps: @begin(enumerate) Any @nt{discrete_choice}s of this aggregate and of its subaggregates are evaluated in an arbitrary order, and converted to the corresponding index type; @PDefn2{Term=[implicit subtype conversion],Sec=(choices of aggregate)} The array component expressions of the aggregate are evaluated in an arbitrary order and their values are converted to the component subtype of the array type; an array component expression is evaluated once for each associated component. @PDefn2{Term=[implicit subtype conversion],Sec=(expressions of aggregate)} @end(enumerate) @begin(Ramification) Subaggregates are not separately evaluated. The conversion of the value of the component expressions to the component subtype might raise Constraint_Error. @end(Ramification) @ChgRef{Version=[2],Kind=[Added],ARef=[AI95-00287-01]} @ChgAdded{Version=[2],Text=[Each @nt in an @nt defines the value for the associated component(s). For an @nt with <>, the associated component(s) are initialized by default as for a stand-alone object of the component subtype (see @RefSecNum{Object Declarations}).]} @Leading@Defn2{Term=[bounds], Sec=(of the index range of an @nt{array_aggregate})} The bounds of the index range of an @nt{array_aggregate} @Redundant[(including a subaggregate)] are determined as follows: @begin(itemize) For an @nt{array_aggregate} with an @key(others) choice, the bounds are those of the corresponding index range from the applicable index constraint; For a @nt{positional_array_aggregate} @Redundant[(or equivalent @nt)] without an @key(others) choice, the lower bound is that of the corresponding index range in the applicable index constraint, if defined, or that of the corresponding index subtype, if not; in either case, the upper bound is determined from the lower bound and the number of @nts @Redundant[(or the length of the @nt)]; For a @nt{named_array_aggregate} without an @key(others) choice, the bounds are determined by the smallest and largest index values covered by any @nt{discrete_choice_list}. @begin{Reason} We don't need to say that each index value has to be covered exactly once, since that is a ramification of the general rule on @nt{aggregate}s that each component's value has to be specified exactly once. @end{Reason} @end(itemize) @IndexCheck{Range_Check} For an @nt, a check is made that the index range defined by its bounds is compatible with the corresponding index subtype. @begin{Discussion} In RM83, this was phrased more explicitly, but once we define "compatibility" between a range and a subtype, it seems to make sense to take advantage of that definition. @end{Discussion} @begin(Ramification) The definition of compatibility handles the special case of a null range, which is always compatible with a subtype. See AI83-00313. @end(Ramification) @IndexCheck{Index_Check} For an @nt{array_aggregate} with an @key(others) choice, a check is made that no @nt is specified for an index value outside the bounds determined by the applicable index constraint. @begin{Discussion} RM83 omitted this case, apparently through an oversight. AI83-00309 defines this as a dynamic check, even though other Ada 83 rules ensured that this check could be performed statically. We now allow an @key(others) choice to be dynamic, even if it is not the only choice, so this check now needs to be dynamic, in some cases. Also, within a generic unit, this would be a nonstatic check in some cases. @end{Discussion} @IndexCheck{Index_Check} For a multidimensional @nt{array_aggregate}, a check is made that all subaggregates that correspond to the same index have the same bounds. @begin{Ramification} No array bounds @lquotes@;sliding@rquotes@; is performed on subaggregates. @end{Ramification} @begin{Reason} If sliding were performed, it would not be obvious which subaggregate would determine the bounds of the corresponding index. @end{Reason} @Defn2{Term=[Constraint_Error],Sec=(raised by failure of run-time check)} The exception Constraint_Error is raised if any of the above checks fail. @end{RunTime} @begin{Notes} In an @nt, positional notation may only be used with two or more @nts; a single @nt in parentheses is interpreted as a @nt. A @nt, such as (1 => X), may be used to specify an array with a single component. @end{Notes} @begin{Examples} @Leading@keepnext@i(Examples of array aggregates with positional associations:) @begin{Example} (7, 9, 5, 1, 3, 2, 4, 8, 6, 0) Table'(5, 8, 4, 1, @key(others) => 0) --@RI[ see @RefSecNum{Array Types} ] @end{Example} @begin{Wide} @leading@keepnext@i(Examples of array aggregates with named associations:) @end{Wide} @begin{Example} (1 .. 5 => (1 .. 8 => 0.0)) --@RI[ two-dimensional] (1 .. N => @key(new) Cell) --@RI[ N new cells, in particular for N = 0] Table'(2 | 4 | 10 => 1, @key(others) => 0) Schedule'(Mon .. Fri => True, @key(others) => False) --@RI[ see @RefSecNum{Array Types}] Schedule'(Wed | Sun => False, @key(others) => True) Vector'(1 => 2.5) --@RI[ single-component vector] @end{Example} @begin{Wide} @leading@keepnext@i(Examples of two-dimensional array aggregates:) @end{Wide} @begin{Example} --@RI[ Three aggregates for the same value of subtype Matrix(1..2,1..3) (see @RefSecNum{Array Types}):] ((1.1, 1.2, 1.3), (2.1, 2.2, 2.3)) (1 => (1.1, 1.2, 1.3), 2 => (2.1, 2.2, 2.3)) (1 => (1 => 1.1, 2 => 1.2, 3 => 1.3), 2 => (1 => 2.1, 2 => 2.2, 3 => 2.3)) @end{Example} @begin{Wide} @leading@keepnext@i(Examples of aggregates as initial values:) @end{Wide} @begin{Example} A : Table := (7, 9, 5, 1, 3, 2, 4, 8, 6, 0); --@RI[ A(1)=7, A(10)=0] B : Table := (2 | 4 | 10 => 1, @key(others) => 0); --@RI[ B(1)=0, B(10)=1] C : @key(constant) Matrix := (1 .. 5 => (1 .. 8 => 0.0)); --@RI[ C'Last(1)=5, C'Last(2)=8] D : Bit_Vector(M .. N) := (M .. N => True); --@RI[ see @RefSecNum{Array Types}] E : Bit_Vector(M .. N) := (@key(others) => True); F : String(1 .. 1) := (1 => 'F'); --@RI[ a one component aggregate: same as "F"] @end{Example} @ChgRef{Version=[2],Kind=[AddedNormal],ARef=[AI-00433-01]} @ChgAdded{Version=[2],Type=[Leading],KeepNext=[T],Text=[@i{Example of an array aggregate with defaulted others choice and with an applicable index constraint provided by an enclosing record aggregate:}]} @begin{Example} @ChgRef{Version=[2],Kind=[AddedNormal]} @ChgAdded{Version=[2],Text=[Buffer'(Size => 50, Pos => 1, Value => String'('x', @key(others) => <>)) --@RI[ see @RefSecNum{Discriminants}]]} @end{Example} @end{Examples} @begin{Incompatible83} @ChgRef{Version=[1],Kind=[Added]}@ChgNote{Presentation AI-00016} @ChgAdded{Version=[1],Type=[Leading],Text=[@Defn{incompatibilities with Ada 83} In Ada 95, no applicable index constraint is defined for a parameter in a call to a generic formal subprogram; thus, some aggregates that are legal in Ada 83 are illegal in Ada 95. For example:]} @begin{Example} @ChgRef{Version=[1],Kind=[Added]}@ChgNote{Presentation AI-00016} @Chg{New=[@key[subtype] S3 @key[is] String (1 .. 3); ... @key[generic] @key[with function] F (The_S3 : @key[in] S3) @key[return] Integer; @key[package] Gp @key[is] I : constant Integer := F ((1 => '!', others => '?')); -- @RI{The aggregate is legal in Ada 83, illegal in Ada 95.} @key[end] Gp;],Old=[]} @end{Example} @ChgRef{Version=[1],Kind=[Added]}@ChgNote{Presentation AI-00016} @Chg{New=[This change eliminates generic contract model problems.],Old=[]} @end{Incompatible83} @begin{Extend83} @Defn{extensions to Ada 83} We now allow "named with others" aggregates in all contexts where there is an applicable index constraint, effectively eliminating what was RM83-4.3.2(6). Sliding never occurs on an aggregate with others, because its bounds come from the applicable index constraint, and therefore already match the bounds of the target. The legality of an @key(others) choice is no longer affected by the staticness of the applicable index constraint. This substantially simplifies several rules, while being slightly more flexible for the user. It obviates the rulings of AI83-00244 and AI83-00310, while taking advantage of the dynamic nature of the "extra values" check required by AI83-00309. Named array aggregates are permitted even if the index type is descended from a formal scalar type. See @RefSecNum(Static Expressions and Static Subtypes) and AI83-00190. @end{Extend83} @begin{DiffWord83} We now separate named and positional array aggregate syntax, since, unlike other aggregates, named and positional associations cannot be mixed in array aggregates (except that an @key(others) choice is allowed in a positional array aggregate). We have also reorganized the presentation to handle multidimensional and one-dimensional aggregates more uniformly, and to incorporate the rulings of AI83-00019, AI83-00309, etc. @end{DiffWord83} @begin{Extend95} @ChgRef{Version=[2],Kind=[AddedNormal],ARef=[AI95-00287-01]} @ChgAdded{Version=[2],Text=[@Defn{extensions to Ada 95}<> can be used in place of an @nt{expression} in an @nt{array_aggregate}, default-initializing the component.]} @end{Extend95} @begin{DiffWord95} @ChgRef{Version=[2],Kind=[AddedNormal],ARef=[AI95-00287-01]} @ChgAdded{Version=[2],Text=[Limited @nt{array_aggregate}s are allowed (since all kinds of aggregates can now be limited, see @RefSecNum{Aggregates}).]} @ChgRef{Version=[2],Kind=[AddedNormal],ARef=[AI-00318-02]} @ChgAdded{Version=[2],Text=[Fixed @nt{aggregate}s to use the subtype of the return object of a function, rather than the result subtype, because they can be different for an @nt{extended_return_statement}, and we want to use the subtype that's explicitly in the code at the point of the @nt{expression}.]} @end{DiffWord95} @LabeledClause{Expressions} @begin{Intro} @Defn{expression} An @i(expression) is a formula that defines the computation or retrieval of a value. In this International Standard, the term @lquotes@;expression@rquotes@; refers to a construct of the syntactic category @nt or of any of the other five syntactic categories defined below. @Defn{and operator}@Defn2{Term=[operator],Sec=(and)} @Defn{or operator}@Defn2{Term=[operator],Sec=(or)} @Defn{xor operator}@Defn2{Term=[operator],Sec=(xor)} @Defn{and then (short-circuit control form)} @Defn{or else (short-circuit control form)} @Defn{= operator}@Defn2{Term=[operator],Sec=(=)} @Defn{equal operator}@Defn2{Term=[operator],Sec=(equal)} @Defn{/= operator}@Defn2{Term=[operator],Sec=(/=)} @Defn{not equal operator}@Defn2{Term=[operator],Sec=(not equal)} @Defn{< operator}@Defn2{Term=[operator],Sec=(<)} @Defn{less than operator}@Defn2{Term=[operator],Sec=(less than)} @Defn{<= operator}@Defn2{Term=[operator],Sec=(<=)} @Defn{less than or equal operator}@Defn2{Term=[operator],Sec=(less than or equal)} @Defn{> operator}@Defn2{Term=[operator],Sec=(>)} @Defn{greater than operator}@Defn2{Term=[operator],Sec=(greater than)} @Defn{>= operator}@Defn2{Term=[operator],Sec=(>=)} @Defn{greater than or equal operator}@Defn2{Term=[operator],Sec=(greater than or equal)} @Defn{in (membership test)} @Defn{not in (membership test)} @Defn{+ operator}@Defn2{Term=[operator],Sec=(+)} @Defn{plus operator}@Defn2{Term=[operator],Sec=(plus)} @Defn{- operator}@Defn2{Term=[operator],Sec=(-)} @Defn{minus operator}@Defn2{Term=[operator],Sec=(minus)} @Defn{& operator}@Defn2{Term=[operator],Sec=(&)} @Defn{ampersand operator}@Defn2{Term=[operator],Sec=(ampersand)} @Defn{concatenation operator}@Defn2{Term=[operator],Sec=(concatenation)} @IndexSee{Term=[catenation operator],See=(concatenation operator)} @Defn{* operator}@Defn2{Term=[operator],Sec=(*)} @Defn{multiply operator}@Defn2{Term=[operator],Sec=(multiply)} @Defn{times operator}@Defn2{Term=[operator],Sec=(times)} @Defn{/ operator}@Defn2{Term=[operator],Sec=(/)} @Defn{divide operator}@Defn2{Term=[operator],Sec=(divide)} @Defn{mod operator}@Defn2{Term=[operator],Sec=(mod)} @Defn{rem operator}@Defn2{Term=[operator],Sec=(rem)} @Defn{** operator}@Defn2{Term=[operator],Sec=(**)} @Defn{exponentiation operator}@Defn2{Term=[operator],Sec=(exponentiation)} @Defn{abs operator}@Defn2{Term=[operator],Sec=(abs)} @Defn{absolute value} @Defn{not operator}@Defn2{Term=[operator],Sec=(not)} @end{Intro} @begin{Syntax} @Syn{tabs=[P23], lhs=,rhs=" @Syn2{relation} {@key{and} @Syn2{relation}} @\| @Syn2{relation} {@key{and} @key{then} @Syn2{relation}} | @Syn2{relation} {@key{or} @Syn2{relation}} @\| @Syn2{relation} {@key{or} @key{else} @Syn2{relation}} | @Syn2{relation} {@key{xor} @Syn2{relation}}"} @Syn{lhs=,rhs=" @Syn2{simple_expression} [@Syn2{relational_operator} @Syn2{simple_expression}] | @Syn2{simple_expression} [@key{not}] @key{in} @Syn2{range} | @Syn2{simple_expression} [@key{not}] @key{in} @Syn2{subtype_mark}"} @Syn{lhs=,rhs="[@Syn2{unary_adding_operator}] @Syn2{term} {@Syn2{binary_adding_operator} @Syn2{term}}"} @Syn{lhs=,rhs="@Syn2{factor} {@Syn2{multiplying_operator} @Syn2{factor}}"} @Syn{lhs=,rhs="@Syn2{primary} [** @Syn2{primary}] | @key{abs} @Syn2{primary} | @key{not} @Syn2{primary}"} @Syn{lhs=,rhs=" @Syn2{numeric_literal} | @key{null} | @Syn2{string_literal} | @Syn2{aggregate} | @Syn2{name} | @Syn2{qualified_expression} | @Syn2{allocator} | (@Syn2{expression})"} @end{Syntax} @begin{Resolution} A @nt used as a @nt shall resolve to denote an object or a value. @begin{Discussion} This replaces RM83-4.4(3). We don't need to mention named numbers explicitly, because the name of a named number denotes a value. We don't need to mention attributes explicitly, because attributes now denote (rather than yield) values in general. Also, the new wording allows attributes that denote objects, which should always have been allowed (in case the implementation chose to have such a thing). @end{Discussion} @begin{Reason} It might seem odd that this is an overload resolution rule, but it is relevant during overload resolution. For example, it helps ensure that a @nt that consists of only the identifier of a parameterless function is interpreted as a @nt rather than directly as a @nt. @end{Reason} @end{Resolution} @begin{StaticSem} Each expression has a type; it specifies the computation or retrieval of a value of that type. @end{StaticSem} @begin{RunTime} @PDefn2{Term=[evaluation], Sec=(primary that is a name)} The value of a @nt that is a @nt{name} denoting an object is the value of the object. @end{RunTime} @begin{ImplPerm} @IndexCheck{Overflow_Check} @Defn2{Term=[Constraint_Error],Sec=(raised by failure of run-time check)} For the evaluation of a @nt that is a @nt denoting an object of an unconstrained numeric subtype, if the value of the object is outside the base range of its type, the implementation may either raise Constraint_Error or return the value of the object. @begin{Ramification} This means that if extra-range intermediates are used to hold the value of an object of an unconstrained numeric subtype, a Constraint_Error can be raised on a read of the object, rather than only on an assignment to it. Similarly, it means that computing the value of an object of such a subtype can be deferred until the first read of the object (presuming no side-effects other than failing an Overflow_Check are possible). This permission is over and above that provided by clause @RefSecNum(Exceptions and Optimization), since this allows the Constraint_Error to move to a different handler. @end{Ramification} @begin{Reason} This permission is intended to allow extra-range registers to be used efficiently to hold parameters and local variables, even if they might need to be transferred into smaller registers for performing certain predefined operations. @end{Reason} @begin{Discussion} There is no need to mention other kinds of @nts, since any Constraint_Error to be raised can be @lquotes@;charged@rquotes@; to the evaluation of the particular kind of @nt. @end{Discussion} @end{ImplPerm} @begin{Examples} @Leading@keepnext@i(Examples of primaries:) @begin{Example} @Trailing@;4.0 --@RI[ real literal] Pi --@RI[ named number] (1 .. 10 => 0) --@RI[ array aggregate] Sum --@RI[ variable] Integer'Last --@RI[ attribute] Sine(X) --@RI[ function call] Color'(Blue) --@RI[ qualified expression] Real(M*N) --@RI[ conversion] (Line_Count + 10) --@RI[ parenthesized expression ] @end{Example} @leading@keepnext@i(Examples of expressions:) @begin{Example} @ChgRef{Version=[2],Kind=[Revised],ARef=[AI95-00433-01]} Volume --@RI[ primary] @key(not) Destroyed --@RI[ factor] 2*Line_Count --@RI[ term] -4.0 --@RI[ simple expression] -4.0 + A --@RI[ simple expression] B**2 - 4.0*A*C --@RI[ simple expression]@Chg{Version=[2],New=[ R*Sin(@unicode<952>)*Cos(@unicode<966>) --@RI[ simple expression]],Old=[]} Password(1 .. 3) = "Bwv" --@RI[ relation] Count @key(in) Small_Int --@RI[ relation] Count @key(not) @key(in) Small_Int --@RI[ relation] Index = 0 @key(or) Item_Hit --@RI[ expression] (Cold @key(and) Sunny) @key(or) Warm --@RI[ expression (parentheses are required)] A**(B**C) --@RI[ expression (parentheses are required)] @end{Example} @end{Examples} @begin{Extend83} @Defn{extensions to Ada 83} In Ada 83, @key{out} parameters and their nondiscriminant subcomponents are not allowed as @nt{primaries}. These restrictions are eliminated in Ada 95. In various contexts throughout the language where Ada 83 syntax rules had @nt, the corresponding Ada 95 syntax rule has @nt instead. This reflects the inclusion of modular integer types, which makes the logical operators "@key[and]", "@key[or]", and "@key[xor]" more useful in expressions of an integer type. Requiring parentheses to use these operators in such contexts seemed unnecessary and potentially confusing. Note that the bounds of a @nt still have to be specified by @nts, since otherwise @nts involving membership tests might be ambiguous. Essentially, the operation ".." is of higher precedence than the logical operators, and hence uses of logical operators still have to be parenthesized when used in a bound of a range. @end{Extend83} @LabeledClause{Operators and Expression Evaluation} @begin{Intro} @Redundant[@Defn{precedence of operators} @Defn{operator precedence} The language defines the following six categories of operators (given in order of increasing precedence). The corresponding @nts, and only those, can be used as @nts in declarations of functions for user-defined operators. See @RefSec(Overloading of Operators).] @end{Intro} @begin{Syntax} @Syn{tabs=[P36], lhs=, rhs="@\ @key{and} | @key{or} | @key{xor}"} @Syn{tabs=[P36], lhs=,rhs="@\ = | /= | < | <= | > | >="} @Syn{tabs=[P36], lhs=,rhs="@\ + | @en | &"} @Syn{tabs=[P36], lhs=,rhs="@\ + | @en"} @Syn{tabs=[P36], lhs=,rhs="@\ * | / | @key{mod} | @key{rem}"} @Syn{tabs=[P36], lhs=,rhs="@\ ** | @key{abs} | @key{not}"} @begin(Discussion) Some of the above syntactic categories are not used in other syntax rules. They are just used for classification. The others are used for both classification and parsing. @end(Discussion) @end{Syntax} @begin{StaticSem} For a sequence of operators of the same precedence level, the operators are associated with their operands in textual order from left to right. Parentheses can be used to impose specific associations. @begin{Discussion} The left-associativity is not directly inherent in the grammar of @RefSecNum{Expressions}, though in @RefSecNum{Method of Description and Syntax Notation} the definition of the metasymbols @b({}) implies left associativity. So this could be seen as redundant, depending on how literally one interprets the definition of the @b({}) metasymbols. See the Implementation Permissions below regarding flexibility in reassociating operators of the same precedence. @end{Discussion} @Defn{predefined operator}@Defn2{Term=[operator],Sec=(predefined)} For each form of type definition, certain of the above operators are @i(predefined); that is, they are implicitly declared immediately after the type definition. @Defn{binary operator}@Defn2{Term=[operator],Sec=(binary)} @Defn{unary operator}@Defn2{Term=[operator],Sec=(unary)} For each such implicit operator declaration, the parameters are called Left and Right for @i(binary) operators; the single parameter is called Right for @i(unary) operators. @redundant[An expression of the form X op Y, where op is a binary operator, is equivalent to a @nt of the form "op"(X, Y). An expression of the form op Y, where op is a unary operator, is equivalent to a @nt of the form "op"(Y). The predefined operators and their effects are described in subclauses @RefSecNum(Logical Operators and Short-Circuit Control Forms) through @RefSecNum(Highest Precedence Operators).] @end{StaticSem} @begin{RunTime} @redundant[@Defn2{Term=[Constraint_Error],Sec=(raised by failure of run-time check)} The predefined operations on integer types either yield the mathematically correct result or raise the exception Constraint_Error. For implementations that support the Numerics Annex, the predefined operations on real types yield results whose accuracy is defined in @RefSecNum(Numerics), or raise the exception Constraint_Error. ] @begin{Honest} Predefined operations on real types can @lquotes@;silently@rquotes@; give wrong results when the Machine_Overflows attribute is false, and the computation overflows. @end{Honest} @end{RunTime} @begin{ImplReq} @Defn2{Term=[Constraint_Error],Sec=(raised by failure of run-time check)} The implementation of a predefined operator that delivers a result of an integer or fixed point type may raise Constraint_Error only if the result is outside the base range of the result type. @Defn2{Term=[Constraint_Error],Sec=(raised by failure of run-time check)} The implementation of a predefined operator that delivers a result of a floating point type may raise Constraint_Error only if the result is outside the safe range of the result type. @begin{Honest} An exception is made for exponentiation by a negative exponent in @RefSecNum{Highest Precedence Operators}. @end{Honest} @end{ImplReq} @begin{ImplPerm} For a sequence of predefined operators of the same precedence level (and in the absence of parentheses imposing a specific association), an implementation may impose any association of the operators with operands so long as the result produced is an allowed result for the left-to-right association, but ignoring the potential for failure of language-defined checks in either the left-to-right or chosen order of association. @begin{Discussion} Note that the permission to reassociate the operands in any way subject to producing a result allowed for the left-to-right association is not much help for most floating point operators, since reassociation may introduce significantly different round-off errors, delivering a result that is outside the model interval for the left-to-right association. Similar problems arise for division with integer or fixed point operands. Note that this permission does not apply to user-defined operators. @end{Discussion} @end{ImplPerm} @begin{Notes} The two operands of an expression of the form X op Y, where op is a binary operator, are evaluated in an arbitrary order, as for any @nt (see @RefSecNum(Subprogram Calls)). @end{Notes} @begin{Examples} @Leading@keepnext@i(Examples of precedence:) @begin{Example} @key(not) Sunny @key(or) Warm --@RI[ same as (not Sunny) or Warm] X > 4.0 @key(and) Y > 0.0 --@RI[ same as (X > 4.0) and (Y > 0.0)] -4.0*A**2 --@RI[ same as @en@;(4.0 * (A**2))] @key(abs)(1 + A) + B --@RI[ same as (abs (1 + A)) + B] Y**(-3) --@RI[ parentheses are necessary] A / B * C --@RI[ same as (A/B)*C] A + (B + C) --@RI[ evaluate B + C before adding it to A ] @end{Example} @end{Examples} @begin{DiffWord83} We don't give a detailed definition of precedence, since it is all implicit in the syntax rules anyway. The permission to reassociate is moved here from RM83-11.6(5), so it is closer to the rules defining operator association. @end{DiffWord83} @LabeledSubClause{Logical Operators and Short-circuit Control Forms} @begin{Resolution} @Defn{short-circuit control form} @Defn{and then (short-circuit control form)} @Defn{or else (short-circuit control form)} An @nt consisting of two @nts connected by @key(and then) or @key(or else) (a @i(short-circuit control form)) shall resolve to be of some boolean type; @PDefn2{Term=[expected type],Sec=(short-circuit control form relation)} the expected type for both @nts is that same boolean type. @begin(Reason) This rule is written this way so that overload resolution treats the two operands symmetrically; the resolution of overloading present in either one can benefit from the resolution of the other. Furthermore, the type expected by context can help. @end(Reason) @end{Resolution} @begin{StaticSem} @Leading@Defn{logical operator}@Defn2{Term=[operator],Sec=(logical)} @Defn{and operator}@Defn2{Term=[operator],Sec=(and)} @Defn{or operator}@Defn2{Term=[operator],Sec=(or)} @Defn{xor operator}@Defn2{Term=[operator],Sec=(xor)} The following logical operators are predefined for every boolean type @i(T), for every modular type @i(T), and for every one-dimensional array type @i(T) whose component type is a boolean type: @IndexSee{Term=[bit string],See=(logical operators on boolean arrays)} @begin{example} @tabclear() @key[function] "@key(and)"(Left, Right : @RI(T)) @key[return] @RI(T) @key[function] "@key(or)" (Left, Right : @RI(T)) @key[return] @RI(T) @key[function] "@key(xor)"(Left, Right : @RI(T)) @key[return] @RI(T) @end{example} @begin{Honest} @ChgRef{Version=[2],Kind=[Deleted],ARef=[AI95-00145-01]} @ChgDeleted{Version=[2],Text=[For predefined operators, the parameter and result subtypes shown as @i(T) are actually the unconstrained subtype of the type.]} @ChgNote{Sorry, Bob, but there is no "honesty" issue here. And "unconstrained" is wrong.} @end{Honest} @begin{Ramification} @ChgRef{Version=[2],Kind=[AddedNormal],ARef=[AI95-00145-01]} @ChgAdded{Version=[2],Text=[For these operators, we are talking about the type without any (interesting) subtype, and not some subtype with a constraint or exclusion. Since it's possible that there is no name for the @lquotes@;uninteresting@rquotes subtype, we denote the type with an italicized @i(T). This applies to the italicized @i(T) in many other predefined operators and attributes as well.@Defn2{Term=[T],Sec=[italicized]}]} @ChgRef{Version=[2],Kind=[AddedNormal],ARef=[AI95-00145-01]} @ChgAdded{Version=[2],Type=[Leading],Text=[In many cases, there is a subtype with the correct properties available. The italicized @i(T) means:]} @begin{Itemize} @ChgRef{Version=[2],Kind=[AddedNormal]} @ChgAdded{Version=[2],Text=[@i(T)'Base, for scalars;]} @ChgRef{Version=[2],Kind=[AddedNormal]} @ChgAdded{Version=[2],Text=[the first subtype of @i(T), for tagged types;]} @ChgRef{Version=[2],Kind=[AddedNormal]} @ChgAdded{Version=[2],Text=[a subtype of the type @i(T) without any constraint or null exclusion, in other cases.]} @end{Itemize} @ChgRef{Version=[2],Kind=[AddedNormal]} @ChgAdded{Version=[2],Text=[Note that @lquotes@;without a constraint@rquotes is not the same as unconstrained. For instance, a record type with no discriminant part is considered constrained; no subtype of it has a constraint, but the subtype is still constrained.]} @ChgRef{Version=[2],Kind=[AddedNormal]} @ChgAdded{Version=[2],Text=[Thus, the last case often is the same as the first subtype of @i(T), but that isn't the case for constrained array types (where the correct subtype is unconstrained) and for access types with a @nt{null_exclusion} (where the correct subtype does not exclude null).]} @ChgRef{Version=[2],Kind=[AddedNormal]} @ChgAdded{Version=[2],Text=[This italicized @i(T) is used for defining operators and attributes of the language. The meaning is intended to be as described here.]} @end{Ramification} For boolean types, the predefined logical operators @key{and}, @key{or}, and @key{xor} perform the conventional operations of conjunction, inclusive disjunction, and exclusive disjunction, respectively. For modular types, the predefined logical operators are defined on a bit-by-bit basis, using the binary representation of the value of the operands to yield a binary representation for the result, where zero represents False and one represents True. If this result is outside the base range of the type, a final subtraction by the modulus is performed to bring the result into the base range of the type. The logical operators on arrays are performed on a component-by-component basis on matching components (as for equality @em see @RefSecNum{Relational Operators and Membership Tests}), using the predefined logical operator for the component type. The bounds of the resulting array are those of the left operand. @end{StaticSem} @begin{RunTime} @PDefn2{Term=[evaluation], Sec=(short-circuit control form)} The short-circuit control forms @key{and then} and @key{or else} deliver the same result as the corresponding predefined @key{and} and @key{or} operators for boolean types, except that the left operand is always evaluated first, and the right operand is not evaluated if the value of the left operand determines the result. @IndexCheck{Length_Check} For the logical operators on arrays, a check is made that for each component of the left operand there is a matching component of the right operand, and vice versa. @IndexCheck{Range_Check} Also, a check is made that each component of the result belongs to the component subtype. @Defn2{Term=[Constraint_Error],Sec=(raised by failure of run-time check)} The exception Constraint_Error is raised if either of the above checks fails. @begin{Discussion} The check against the component subtype is per AI83-00535. @end{Discussion} @end{RunTime} @begin{Notes} @Leading@;The conventional meaning of the logical operators is given by the following truth table: @begin(Display) @TabClear() @TabSet(P4, P20, P36, P52, P68) @\@ @ A@\@ @ B@\(A @key(and) B)@\(A @key(or) B)@\(A @key(xor) B)@* @\True @\True @\True @\True @\False @\True @\False @\False @\True @\True @\False @\True @\False @\True @\True @\False @\False @\False @\False @\False @end(Display) @end{Notes} @begin{Examples} @Leading@keepnext@i(Examples of logical operators:) @begin{Example} Sunny @key(or) Warm Filter(1 .. 10) @key(and) Filter(15 .. 24) --@RI[ see @RefSecNum{Index Constraints and Discrete Ranges} ] @end{Example} @begin{Wide} @leading@keepnext@i(Examples of short-circuit control forms:) @end{Wide} @begin{Example} Next_Car.Owner /= @key(null) @key(and) @key(then) Next_Car.Owner.Age > 25 --@RI[ see @RefSecNum{Incomplete Type Declarations}] N = 0 @key(or) @key(else) A(N) = Hit_Value @end{Example} @end{Examples} @LabeledSubClause{Relational Operators and Membership Tests} @begin{Intro} @redundant[@Defn{relational operator}@Defn2{Term=[operator],Sec=(relational)} @IndexSee{Term=[comparison operator],See=(relational operator)} @Defn{equality operator}@Defn2{Term=[operator],Sec=(equality)} The @i(equality operators) = (equals) and /= (not equals) are predefined for nonlimited types. @Defn{ordering operator}@Defn2{Term=[operator],Sec=(ordering)} The other @nts are the @i(ordering operators) < (less than), <= (less than or equal), > (greater than), and >= (greater than or equal). @Defn{= operator}@Defn2{Term=[operator],Sec=(=)} @Defn{equal operator}@Defn2{Term=[operator],Sec=(equal)} @Defn{/= operator}@Defn2{Term=[operator],Sec=(/=)} @Defn{not equal operator}@Defn2{Term=[operator],Sec=(not equal)} @Defn{< operator}@Defn2{Term=[operator],Sec=(<)} @Defn{less than operator}@Defn2{Term=[operator],Sec=(less than)} @Defn{<= operator}@Defn2{Term=[operator],Sec=(<=)} @Defn{less than or equal operator}@Defn2{Term=[operator],Sec=(less than or equal)} @Defn{> operator}@Defn2{Term=[operator],Sec=(>)} @Defn{greater than operator}@Defn2{Term=[operator],Sec=(greater than)} @Defn{>= operator}@Defn2{Term=[operator],Sec=(>=)} @Defn{greater than or equal operator}@Defn2{Term=[operator],Sec=(greater than or equal)} @Defn{discrete array type} The ordering operators are predefined for scalar types, and for @i(discrete array types), that is, one-dimensional array types whose components are of a discrete type. @begin{Ramification} The equality operators are not defined for @i{every} nonlimited type @em see below for the exact rule. @end{Ramification} @Defn{membership test} @Defn{in (membership test)} @Defn{not in (membership test)} A @i(membership test), using @key(in) or @key(not in), determines whether or not a value belongs to a given subtype or range, or has a tag that identifies a type that is covered by a given type. Membership tests are allowed for all types.] @end{Intro} @begin{Resolution} @ChgRef{Version=[2],Kind=[Revised],ARef=[AI95-00251-01]} @PDefn2{Term=[expected type], Sec=(membership test simple_expression)} @Defn2{Term=[tested type], Sec=(of a membership test)} The @i(tested type) of a membership test is the type of the @nt or the type determined by the @nt. If the tested type is tagged, then the @nt shall resolve to be of a type that @Chg{Version=[2],New=[is convertible (see @RefSecNum{Type Conversions}) to],Old=[covers or is covered by]} the tested type; if untagged, the expected type for the @nt is the tested type. @begin{Reason} @ChgRef{Version=[2],Kind=[Revised],ARef=[AI95-00230-01]} The part of the rule for untagged types is stated in a way that ensures that operands like @Chg{Version=[2],New=[a string literal],Old=[@key(null)]} are still legal as operands of a membership test. @ChgRef{Version=[2],Kind=[Revised],ARef=[AI95-00251-01]} The significance of @lquotes@;@Chg{Version=[2],New=[is convertible to], Old=[covers or is covered by]}@rquotes@; is that we allow the @nt to be of any class-wide type that @Chg{Version=[2], New=[could be converted to],Old=[covers]} the tested type, not just the one rooted at the tested type.@Chg{Version=[2],New=[ This includes any class-wide type that covers the tested type, along with class-wide interfaces in some cases.],Old=[]} @end{Reason} @end{Resolution} @begin{Legality} For a membership test, if the @nt is of a tagged class-wide type, then the tested type shall be (visibly) tagged. @begin{Ramification} Untagged types covered by the tagged class-wide type are not permitted. Such types can exist if they are descendants of a private type whose full type is tagged. This rule is intended to avoid confusion since such derivatives don't have their @lquotes@;own@rquotes@; tag, and hence are indistinguishable from one another at run time once converted to a covering class-wide type. @end{Ramification} @end{Legality} @begin{StaticSem} The result type of a membership test is the predefined type Boolean. @Leading@;The equality operators are predefined for every specific type @i(T) that is not limited, and not an anonymous access type, with the following specifications: @begin(example) @key(function) "=" (Left, Right : @RI(T)) @key(return) Boolean @key(function) "/="(Left, Right : @RI(T)) @key(return) Boolean @end(example) @ChgRef{Version=[2],Kind=[Added],ARef=[AI95-00230-01]} @ChgAdded{Version=[2],Type=[Leading],Text=[The following additional equality operators for the @i type are declared in package Standard for use with anonymous access types:]} @begin(example) @ChgRef{Version=[2],Kind=[Added]} @ChgAdded{Version=[2],Text=[@key "=" (Left, Right : @i) @key Boolean @key "/="(Left, Right : @i) @key Boolean]} @end(example) @Leading@;The ordering operators are predefined for every specific scalar type @i(T), and for every discrete array type @i(T), with the following specifications: @begin(example) @key(function) "<" (Left, Right : @RI(T)) @key(return) Boolean @key(function) "<="(Left, Right : @RI(T)) @key(return) Boolean @key(function) ">" (Left, Right : @RI(T)) @key(return) Boolean @key(function) ">="(Left, Right : @RI(T)) @key(return) Boolean @end(example) @end{StaticSem} @begin{Resolution} @ChgRef{Version=[2],Kind=[Added],ARef=[AI95-00230-01],ARef=[AI95-00420-01]} @ChgAdded{Version=[2],Text=[At least one of the operands of the equality operators for @i shall be of a specific anonymous access type. These equality operators shall not be used if either operand is of a type whose designated type @i has a user-defined primitive equality operator with result type Boolean, that is declared immediately within the same list of declarations as @i, and at least one of whose operands is an access parameter also with designated type @i, unless the predefined equality operator is identified using an expanded name with prefix denoting the package Standard.]} @begin{Reason} @ChgRef{Version=[2],Kind=[AddedNormal]} @ChgAdded{Version=[2],Text=[The first sentence prevents compatibility problems by ensuring that these operators are not used for named access types. Also, universal access types do not count for the purposes of this rule. Otherwise, equality expressions like (X = @key{null}) would be ambiguous for normal access types.]} @ChgRef{Version=[2],Kind=[AddedNormal]} @ChgAdded{Version=[2],Text=[The rest of the rule makes it possible to call user-defined "=" operators (they'd be hidden otherwise), and to write user-defined "=" operations (by making it possible to see the universal operator using the Standard prefix.]} @end{Reason} @end{Resolution} @begin{Legality} @ChgRef{Version=[2],Kind=[Added],ARef=[AI95-00230-01]} @ChgAdded{Version=[2],Text=[The operands of the equality operators for @i shall be convertible to one another (see @RefSecNum{Type Conversions}).]} @begin{Reason} @ChgRef{Version=[2],Kind=[AddedNormal]} @ChgAdded{Version=[2],Text=[This ensures that the designated type is the same, or one of the operands is @key{null}.]} @end{Reason} @end{Legality} @begin{RunTime} For discrete types, the predefined relational operators are defined in terms of corresponding mathematical operations on the position numbers of the values of the operands. For real types, the predefined relational operators are defined in terms of the corresponding mathematical operations on the values of the operands, subject to the accuracy of the type. @begin{Ramification} For floating point types, the results of comparing @i(nearly) equal values depends on the accuracy of the implementation (see @RefSec{Model of Floating Point Arithmetic} for implementations that support the Numerics Annex). @end{Ramification} @begin{ImplNote} On a machine with signed zeros, if the generated code generates both plus zero and minus zero, plus and minus zero must be equal by the predefined equality operators. @end{ImplNote} Two access-to-object values are equal if they designate the same object, or if both are equal to the null value of the access type. Two access-to-subprogram values are equal if they are the result of the same evaluation of an Access @nt, or if both are equal to the null value of the access type. Two access-to-subprogram values are unequal if they designate different subprograms. @PDefn{unspecified} @Redundant[It is unspecified whether two access values that designate the same subprogram but are the result of distinct evaluations of Access @nts are equal or unequal.] @begin{Reason} This allows each Access @nt for a subprogram to designate a distinct @lquotes@;wrapper@rquotes@; subprogram if necessary to support an indirect call. @end{Reason} @Defn2{Term=[equality operator],Sec=(special inheritance rule for tagged types)} For a type extension, predefined equality is defined in terms of the primitive @Redundant[(possibly user-defined)] equals operator of the parent type and of any tagged components of the extension part, and predefined equality for any other components not inherited from the parent type. @begin{Ramification} Two values of a type extension are not equal if there is a @nt in the extension part and the two values have different @nts present. This is a ramification of the requirement that a discriminant governing such a @nt has to be a @lquotes@;new@rquotes@; discriminant, and so has to be equal in the two values for the values to be equal. Note that @nts in the parent part need not match if the primitive equals operator for the parent type considers them equal. @ChgRef{Version=[2],Kind=[AddedNormal],ARef=[AI95-00349-01]} @ChgAdded{Version=[2],Type=[Leading],Text=[The full type extension's operation is used for a private extension. This follows as only full types have parent types; the type specified in a private extension is an ancestor, but not necessarily the parent type. For instance, in:]} @begin(Example) @ChgRef{Version=[2],Kind=[AddedNormal]} @Chg{Version=[2],New=[@key{with} Pak1; @key{package} Pak2 @key{is} @key{type} Typ3 @key{is} @key{new} Pak1.Typ1 @key{with} @key{private}; @key{private} @key{type} Typ3 @key{is} @key{new} Pak1.Typ2 @key{with} @key{null} @key{record}; @key{end} Pak2;],Old=[]} @end(Example) @ChgRef{Version=[2],Kind=[AddedNormal]} @Chg{Version=[2],New=[the parent type is Pak1.Typ2, not Pak1.Typ1, and the equality operator of Pak1.Typ2 is used to create predefined equality for Typ3.],Old=[]} @end{Ramification} For a private type, if its full type is tagged, predefined equality is defined in terms of the primitive equals operator of the full type; if the full type is untagged, predefined equality for the private type is that of its full type. @Leading@Defn{matching components} For other composite types, the predefined equality operators @Redundant[(and certain other predefined operations on composite types @em see @RefSecNum(Logical Operators and Short-circuit Control Forms) and @RefSecNum(Type Conversions))] are defined in terms of the corresponding operation on @i(matching components), defined as follows: @begin(itemize) For two composite objects or values of the same non-array type, matching components are those that correspond to the same @nt or @nt; For two one-dimensional arrays of the same type, matching components are those (if any) whose index values match in the following sense: the lower bounds of the index ranges are defined to match, and the successors of matching indices are defined to match; For two multidimensional arrays of the same type, matching components are those whose index values match in successive index positions. @end(itemize) The analogous definitions apply if the types of the two objects or values are convertible, rather than being the same. @begin{Discussion} Ada 83 seems to omit this part of the definition, though it is used in array type conversions. See @RefSecNum{Type Conversions}. @end{Discussion} @Leading@;Given the above definition of matching components, the result of the predefined equals operator for composite types (other than for those composite types covered earlier) is defined as follows: @begin(Itemize) If there are no components, the result is defined to be True; If there are unmatched components, the result is defined to be False; Otherwise, the result is defined in terms of the primitive equals operator for any matching tagged components, and the predefined equals for any matching untagged components. @begin{Reason} This asymmetry between tagged and untagged components is necessary to preserve upward compatibility and corresponds with the corresponding situation with generics, where the predefined operations @lquotes@;reemerge@rquotes@; in a generic for untagged types, but do not for tagged types. Also, only tagged types support user-defined assignment (see @RefSecNum{User-Defined Assignment and Finalization}), so only tagged types can fully handle levels of indirection in the implementation of the type. For untagged types, one reason for a user-defined equals operator might be to allow values with different bounds or discriminants to compare equal in certain cases. When such values are matching components, the bounds or discriminants will necessarily match anyway if the discriminants of the enclosing values match. @end{Reason} @end(Itemize) @begin{Ramification} Two null arrays of the same type are always equal; two null records of the same type are always equal. Note that if a composite object has a component of a floating point type, and the floating point type has both a plus and minus zero, which are considered equal by the predefined equality, then a block compare cannot be used for the predefined composite equality. Of course, with user-defined equals operators for tagged components, a block compare breaks down anyway, so this is not the only special case that requires component-by-component comparisons. On a one's complement machine, a similar situation might occur for integer types, since one's complement machines typically have both a plus and minus (integer) zero. @end{Ramification} @ChgRef{Version=[1],Kind=[Added],Ref=[8652/0016],ARef=[AI95-00123-01]} @Chg{New=[For any composite type, the order in which "=" is called for components is unspecified. Furthermore, if the result can be determined before calling "=" on some components, it is unspecified whether "=" is called on those components.@PDefn{Unspecified}],Old=[]} The predefined "/=" operator gives the complementary result to the predefined "=" operator. @begin{Ramification} Furthermore, if the user defines an "=" operator that returns Boolean, then a "/=" operator is implicitly declared in terms of the user-defined "=" operator so as to give the complementary result. See @RefSecNum(Overloading of Operators). @end{Ramification} @Defn{lexicographic order} For a discrete array type, the predefined ordering operators correspond to @i(lexicographic order) using the predefined order relation of the component type: A null array is lexicographically less than any array having at least one component. In the case of nonnull arrays, the left operand is lexicographically less than the right operand if the first component of the left operand is less than that of the right; otherwise the left operand is lexicographically less than the right operand only if their first components are equal and the tail of the left operand is lexicographically less than that of the right (the @i(tail) consists of the remaining components beyond the first and can be null). @PDefn2{Term=[evaluation], Sec=(membership test)} For the evaluation of a membership test, the @nt and the @nt (if any) are evaluated in an arbitrary order. @Leading@;A membership test using @key(in) yields the result True if: @begin(itemize) The tested type is scalar, and the value of the @nt belongs to the given @nt, or the range of the named subtype; or @begin{Ramification} The scalar membership test only does a range check. It does not perform any other check, such as whether a value falls in a @lquotes@;hole@rquotes@; of a @lquotes@;holey@rquotes@; enumeration type. The Pos attribute function can be used for that purpose. Even though Standard.Float is an unconstrained subtype, the test @lquotes@;X in Float@rquotes@; will still return False (presuming the evaluation of X does not raise Constraint_Error) when X is outside Float'Range. @end{Ramification} @ChgRef{Version=[2],Kind=[Revised],ARef=[AI95-00231-01]} @ChgAdded{Version=[2],Type=[Leading],Text=[]}@ChgNote{To get conditional Leading} The tested type is not scalar, and the value of the @nt satisfies any constraints of the named subtype, and@Chg{Version=[2],New=[:],Old=[, if the type of the @nt{simple_expression} is class-wide, the value has a tag that identifies a type covered by the tested type.]} @begin{Inneritemize} @ChgRef{Version=[2],Kind=[Added],ARef=[AI95-00231-01]} @ChgAdded{Version=[2],Text=[if the type of the @nt{simple_expression} is class-wide, the value has a tag that identifies a type covered by the tested type;]} @begin{Ramification} Note that the tag is not checked if the @nt{simple_expression} is of a specific type. @end{Ramification} @ChgRef{Version=[2],Kind=[Added],ARef=[AI95-00231-01]} @ChgAdded{Version=[2],Text=[if the tested type is an access type and the named subtype excludes null, the value of the @nt{simple_expression} is not null.]} @end{Inneritemize} @end(itemize) Otherwise the test yields the result False. A membership test using @key(not in) gives the complementary result to the corresponding membership test using @key(in). @end{RunTime} @begin{ImplReq} @ChgRef{Version=[1],Kind=[Added],Ref=[8652/0016],ARef=[AI95-00123-01]} @ChgAdded{Version=[1],Text=[For all nonlimited types declared in language-defined packages, the "=" and "/=" operators of the type shall behave as if they were the predefined equality operators for the purposes of the equality of composite types and generic formal types.]} @begin{Ramification} @ChgRef{Version=[1],Kind=[Added]} @ChgAdded{Version=[1],Text=[If any language-defined types are implemented with a user-defined "=" operator, then either the full type must be tagged, or the compiler must use @lquotes@;magic@rquotes@; to implement equality for this type. A normal user-defined "=" operator for an untagged type does @i{not} meet this requirement.]} @end{Ramification} @end{ImplReq} @begin{Notes} No exception is ever raised by a membership test, by a predefined ordering operator, or by a predefined equality operator for an elementary type, but an exception can be raised by the evaluation of the operands. A predefined equality operator for a composite type can only raise an exception if the type has a tagged part whose primitive equals operator propagates an exception. If a composite type has components that depend on discriminants, two values of this type have matching components if and only if their discriminants are equal. Two nonnull arrays have matching components if and only if the length of each dimension is the same for both. @end{Notes} @begin{Examples} @Leading@keepnext@i(Examples of expressions involving relational operators and membership tests:) @begin{Example} X /= Y "" < "A" @key(and) "A" < "Aa" --@RI[ True] "Aa" < "B" @key(and) "A" < "A " --@RI[ True] My_Car = @key(null) --@RI[ true if My_Car has been set to null (see @RefSecNum{Incomplete Type Declarations})] My_Car = Your_Car --@RI[ true if we both share the same car] My_Car.@key[all] = Your_Car.@key[all] --@RI[ true if the two cars are identical] N @key(not) @key(in) 1 .. 10 --@RI[ range membership test] Today @key(in) Mon .. Fri --@RI[ range membership test] Today @key(in) Weekday --@RI[ subtype membership test (see @RefSecNum{Enumeration Types})] Archive @key(in) Disk_Unit --@RI[ subtype membership test (see @RefSecNum{Variant Parts and Discrete Choices})] Tree.@key(all) @key(in) Addition'Class --@RI[ class membership test (see @RefSecNum{Type Extensions})] @end{Example} @end{Examples} @begin{Extend83} @Defn{extensions to Ada 83} Membership tests can be used to test the tag of a class-wide value. Predefined equality for a composite type is defined in terms of the primitive equals operator for tagged components or the parent part. @end{Extend83} @begin{DiffWord83} The term @lquotes@;membership test@rquotes@; refers to the @nt "X in S" rather to simply the reserved word @key(in) or @key(not in). We use the term @lquotes@;equality operator@rquotes@; to refer to both the = (equals) and /= (not equals) operators. Ada 83 referred to = as @i(the) equality operator, and /= as the inequality operator. The new wording is more consistent with the ISO 10646 name for "=" (equals sign) and provides a category similar to @lquotes@;ordering operator@rquotes@; to refer to both = and /=. We have changed the term @lquotes@;catenate@rquotes@; to @lquotes@;concatenate@rquotes@;. @end{DiffWord83} @begin{Extend95} @ChgRef{Version=[2],Kind=[AddedNormal],ARef=[AI95-00230-01],ARef=[AI95-00420-01]} @Chg{Version=[2],New=[@Defn{extensions to Ada 95}The @i{universal_access} equality operators are new. They provide equality operations (most importantly, testing against @key{null}) for anonymous access types.],Old=[]} @end{Extend95} @begin{DiffWord95} @ChgRef{Version=[2],Kind=[AddedNormal],Ref=[8652/0016],ARef=[AI95-00123-01]} @Chg{Version=[2],New=[@b Wording was added to clarify that the order of calls (and whether the calls are made at all) on "=" for components is unspecified. Also clarified that "=" must compose properly for language-defined types.],Old=[]} @ChgRef{Version=[2],Kind=[AddedNormal],ARef=[AI95-00251-01]} @Chg{Version=[2],New=[Memberships were adjusted to allow interfaces which don't cover the tested type, in order to be consistent with type conversions.],Old=[]} @end{DiffWord95} @LabeledSubClause{Binary Adding Operators} @begin{StaticSem} @Leading@Defn{binary adding operator}@Defn2{Term=[operator],Sec=(binary adding)} @Defn{+ operator}@Defn2{Term=[operator],Sec=(+)} @Defn{plus operator}@Defn2{Term=[operator],Sec=(plus)} @Defn{- operator}@Defn2{Term=[operator],Sec=(-)} @Defn{minus operator}@Defn2{Term=[operator],Sec=(minus)} The binary adding operators + (addition) and @en (subtraction) are predefined for every specific numeric type @i(T) with their conventional meaning. They have the following specifications: @begin(example) @key(function) "+"(Left, Right : @RI(T)) @key(return) @RI(T) @key(function) "-"(Left, Right : @RI(T)) @key(return) @RI(T) @end(example) @Leading@Defn{& operator}@Defn2{Term=[operator],Sec=(&)} @Defn{ampersand operator}@Defn2{Term=[operator],Sec=(ampersand)} @Defn{concatenation operator}@Defn2{Term=[operator],Sec=(concatenation)} @IndexSee{Term=[catenation operator],See=(concatenation operator)} The concatenation operators & are predefined for every nonlimited, one-dimensional array type @i(T) with component type @i(C). They have the following specifications: @begin(example) @key(function) "&"(Left : @RI(T); Right : @RI(T)) @key(return) @RI(T) @key(function) "&"(Left : @RI(T); Right : @RI(C)) @key(return) @RI(T) @key(function) "&"(Left : @RI(C); Right : @RI(T)) @key(return) @RI(T) @key(function) "&"(Left : @RI(C); Right : @RI(C)) @key(return) @RI(T) @end(example) @end{StaticSem} @begin{RunTime} @Leading@PDefn2{Term=[evaluation], Sec=(concatenation)} For the evaluation of a concatenation with result type @i(T), if both operands are of type @i(T), the result of the concatenation is a one-dimensional array whose length is the sum of the lengths of its operands, and whose components comprise the components of the left operand followed by the components of the right operand. If the left operand is a null array, the result of the concatenation is the right operand. Otherwise, the lower bound of the result is determined as follows: @begin(Itemize) If the ultimate ancestor of the array type was defined by a @nt, then the lower bound of the result is that of the index subtype; @begin(Reason) This rule avoids Constraint_Error when using concatenation on an array type whose first subtype is constrained. @end(Reason) If the ultimate ancestor of the array type was defined by an @nt, then the lower bound of the result is that of the left operand. @end(Itemize) @Redundant[The upper bound is determined by the lower bound and the length.] @IndexCheck{Index_Check} A check is made that the upper bound of the result of the concatenation belongs to the range of the index subtype, unless the result is a null array. @Defn2{Term=[Constraint_Error],Sec=(raised by failure of run-time check)} Constraint_Error is raised if this check fails. If either operand is of the component type @i(C), the result of the concatenation is given by the above rules, using in place of such an operand an array having this operand as its only component (converted to the component subtype) and having the lower bound of the index subtype of the array type as its lower bound. @PDefn2{Term=[implicit subtype conversion],Sec=(operand of concatenation)} @begin{Ramification} The conversion might raise Constraint_Error. The conversion provides @lquotes@;sliding@rquotes@; for the component in the case of an array-of-arrays, consistent with the normal Ada 95 rules that allow sliding during parameter passing. @end{Ramification} @Defn2{Term=[assignment operation], Sec=(during evaluation of concatenation)} The result of a concatenation is defined in terms of an assignment to an anonymous object, as for any function call (see @RefSecNum{Return Statements}). @begin{Ramification} This implies that value adjustment is performed as appropriate @em see @RefSecNum{User-Defined Assignment and Finalization}. We don't bother saying this for other predefined operators, even though they are all function calls, because this is the only one where it matters. It is the only one that can return a value having controlled parts. @end{Ramification} @end{RunTime} @begin{Notes} As for all predefined operators on modular types, the binary adding operators + and @en on modular types include a final reduction modulo the modulus if the result is outside the base range of the type. @begin{ImplNote} A full "modulus" operation need not be performed after addition or subtraction of modular types. For binary moduli, a simple mask is sufficient. For nonbinary moduli, a check after addition to see if the value is greater than the high bound of the base range can be followed by a conditional subtraction of the modulus. Conversely, a check after subtraction to see if a "borrow" was performed can be followed by a conditional addition of the modulus. @end{ImplNote} @end{Notes} @begin{Examples} @Leading@keepnext@i(Examples of expressions involving binary adding operators:) @begin{Example} Z + 0.1 --@RI[ Z has to be of a real type ] "A" & "BCD" --@RI[ concatenation of two string literals] 'A' & "BCD" --@RI[ concatenation of a character literal and a string literal] 'A' & 'A' --@RI[ concatenation of two character literals ] @end{Example} @end{Examples} @begin{Inconsistent83} @Defn{inconsistencies with Ada 83} The lower bound of the result of concatenation, for a type whose first subtype is constrained, is now that of the index subtype. This is inconsistent with Ada 83, but generally only for Ada 83 programs that raise Constraint_Error. For example, the concatenation operator in @begin(Example) X : @key(array)(1..10) @key(of) Integer; @key(begin) X := X(6..10) & X(1..5); @end(Example) would raise Constraint_Error in Ada 83 (because the bounds of the result of the concatenation would be 6..15, which is outside of 1..10), but would succeed and swap the halves of X (as expected) in Ada 95. @end{Inconsistent83} @begin{Extend83} @Defn{extensions to Ada 83} Concatenation is now useful for array types whose first subtype is constrained. When the result type of a concatenation is such an array type, Constraint_Error is avoided by effectively first sliding the left operand (if nonnull) so that its lower bound is that of the index subtype. @end{Extend83} @LabeledSubClause{Unary Adding Operators} @begin{StaticSem} @Leading@Defn{unary adding operator}@Defn2{Term=[operator],Sec=(unary adding)} @Defn{+ operator}@Defn2{Term=[operator],Sec=(+)} @Defn{plus operator}@Defn2{Term=[operator],Sec=(plus)} @Defn{- operator}@Defn2{Term=[operator],Sec=(-)} @Defn{minus operator}@Defn2{Term=[operator],Sec=(minus)} The unary adding operators + (identity) and @en (negation) are predefined for every specific numeric type @i(T) with their conventional meaning. They have the following specifications: @begin(example) @key(function) "+"(Right : @RI(T)) @key(return) @RI(T) @key(function) "-"(Right : @RI(T)) @key(return) @RI(T) @end(example) @end{StaticSem} @begin{Notes} For modular integer types, the unary adding operator @en, when given a nonzero operand, returns the result of subtracting the value of the operand from the modulus; for a zero operand, the result is zero. @end{Notes} @LabeledSubClause{Multiplying Operators} @begin{StaticSem} @Leading@Defn{multiplying operator}@Defn2{Term=[operator],Sec=(multiplying)} @Defn{* operator}@Defn2{Term=[operator],Sec=(*)} @Defn{multiply operator}@Defn2{Term=[operator],Sec=(multiply)} @Defn{times operator}@Defn2{Term=[operator],Sec=(times)} @Defn{/ operator}@Defn2{Term=[operator],Sec=(/)} @Defn{divide operator}@Defn2{Term=[operator],Sec=(divide)} @Defn{mod operator}@Defn2{Term=[operator],Sec=(mod)} @Defn{rem operator}@Defn2{Term=[operator],Sec=(rem)} The multiplying operators * (multiplication), / (division), @key(mod) (modulus), and @key(rem) (remainder) are predefined for every specific integer type @i(T): @begin(example) @key(function) "*" (Left, Right : @RI(T)) @key(return) @RI(T) @key(function) "/" (Left, Right : @RI(T)) @key(return) @RI(T) @key(function) "@key(mod)"(Left, Right : @RI(T)) @key(return) @RI(T) @key(function) "@key(rem)"(Left, Right : @RI(T)) @key(return) @RI(T) @end(example) Signed integer multiplication has its conventional meaning. @Leading@keepnext@;Signed integer division and remainder are defined by the relation: @begin(example) A = (A/B)*B + (A @key(rem) B) @end(example) @Leading@;where (A @key(rem) B) has the sign of A and an absolute value less than the absolute value of B. Signed integer division satisfies the identity: @begin(example) (-A)/B = -(A/B) = A/(-B) @end(example) @begin{Wide} @Leading@;The signed integer modulus operator is defined such that the result of A @key(mod) B has the sign of B and an absolute value less than the absolute value of B; in addition, for some signed integer value N, this result satisfies the relation: @begin(example) A = B*N + (A @key(mod) B) @end(example) The multiplying operators on modular types are defined in terms of the corresponding signed integer operators@Redundant[, followed by a reduction modulo the modulus if the result is outside the base range of the type] @Redundant[(which is only possible for the "*" operator)]. @begin{Ramification} The above identity satisfied by signed integer division is not satisfied by modular division because of the difference in effect of negation. @end{Ramification} @end{Wide} @Leading@;Multiplication and division operators are predefined for every specific floating point type @i(T): @begin(example) @key(function) "*"(Left, Right : @RI(T)) @key(return) @RI(T) @key(function) "/"(Left, Right : @RI(T)) @key(return) @RI(T) @end(example) @Leading@;The following multiplication and division operators, with an operand of the predefined type Integer, are predefined for every specific fixed point type @i(T): @begin(example) @key(function) "*"(Left : @RI(T); Right : Integer) @key(return) @RI(T) @key(function) "*"(Left : Integer; Right : @RI(T)) @key(return) @RI(T) @key(function) "/"(Left : @RI(T); Right : Integer) @key(return) @RI(T) @end(example) @Leading@Redundant[All of the above multiplying operators are usable with an operand of an appropriate universal numeric type.] The following additional multiplying operators for @i(root_real) are predefined@Redundant[, and are usable when both operands are of an appropriate universal or root numeric type, and the result is allowed to be of type @i(root_real), as in a @nt]: @begin{Ramification} These operators are analogous to the multiplying operators involving fixed or floating point types where @i(root_real) substitutes for the fixed or floating point type, and @i(root_integer) substitutes for Integer. Only values of the corresponding universal numeric types are implicitly convertible to these root numeric types, so these operators are really restricted to use with operands of a universal type, or the specified root numeric types. @end{Ramification} @begin(example) @key(function) "*"(Left, Right : @RI(root_real)) @key(return) @RI(root_real) @key(function) "/"(Left, Right : @RI(root_real)) @key(return) @RI(root_real) @key(function) "*"(Left : @RI(root_real); Right : @RI(root_integer)) @key(return) @RI(root_real) @key(function) "*"(Left : @RI(root_integer); Right : @RI(root_real)) @key(return) @RI(root_real) @key(function) "/"(Left : @RI(root_real); Right : @RI(root_integer)) @key(return) @RI(root_real) @end(example) @Leading@;Multiplication and division between any two fixed point types are provided by the following two predefined operators: @begin{Ramification} @i(Universal_fixed) is the universal type for the class of fixed point types, meaning that these operators take operands of any fixed point types (not necessarily the same) and return a result that is implicitly (or explicitly) convertible to any fixed point type. @end{Ramification} @begin(example) @key(function) "*"(Left, Right : @RI(universal_fixed)) @key(return) @RI(universal_fixed) @key(function) "/"(Left, Right : @RI(universal_fixed)) @key(return) @RI(universal_fixed) @end(example) @end{StaticSem} @begin{Resolution} @ChgRef{Version=[2],Kind=[Added],ARef=[AI95-00364-01],ARef=[AI95-00420-01]} @ChgAdded{Version=[2],Text=[The above two fixed-fixed multiplying operators shall not be used in a context where the expected type for the result is itself @i(universal_fixed) @Redundant[@em the context has to identify some other numeric type to which the result is to be converted, either explicitly or implicitly]. An explicit conversion is required on the result when using the above fixed-fixed multiplication operator when either operand is of a type having a user-defined primitive multiplication operator declared immediately within the same list of declarations as the type and with both formal parameters of a fixed-point type, unless the predefined universal operator is identified using an expanded name with the @nt{prefix} denoting the package Standard. A corresponding requirement applies to the universal fixed-fixed division operator.]} @begin(Discussion) @ChgRef{Version=[2],Kind=[AddedNormal]} @ChgAdded{Version=[2],Text=[The @i(small) of @i(universal_fixed) is infinitesimal; no loss of precision is permitted. However, fixed-fixed division is impractical to implement when an exact result is required, and multiplication will sometimes result in unanticipated overflows in such circumstances, so we require an explicit conversion to be inserted in expressions like A * B * C if A, B, and C are each of some fixed point type.]} @ChgRef{Version=[2],Kind=[AddedNormal]} @ChgAdded{Version=[2],Text=[On the other hand, X := A * B; is permitted by this rule, even if X, A, and B are all of different fixed point types, since the expected type for the result of the multiplication is the type of X, which is necessarily not @i(universal_fixed).]} @ChgRef{Version=[2],Kind=[AddedNormal],ARef=[AI95-00364-01],ARef=[AI95-00420-01]} @ChgAdded{Version=[2],Text=[We have made these into Name Resolution rules to ensure that user-defined primitive fixed-fixed operators are not made unusable due to the presence of these universal fixed-fixed operators. But we do allow these operators to be used if prefixed by package Standard, so that they can be used in the definitions of user-defined operators.]} @end(Discussion) @end{Resolution} @begin{Legality} @ChgRef{Version=[2],Kind=[Deleted],ARef=[AI95-00364-01]} @ChgDeleted{Version=[2],Text=[The above two fixed-fixed multiplying operators shall not be used in a context where the expected type for the result is itself @i(universal_fixed) @em @Redundant[the context has to identify some other numeric type to which the result is to be converted, either explicitly or implicitly].]} @begin(Discussion) @ChgRef{Version=[2],Kind=[Deleted]} @ChgDeleted{Version=[2],Text=[The @i(small) of @i(universal_fixed) is infinitesimal; no loss of precision is permitted. However, fixed-fixed division is impractical to implement when an exact result is required, and multiplication will sometimes result in unanticipated overflows in such circumstances, so we require an explicit conversion to be inserted in expressions like A * B * C if A, B, and C are each of some fixed point type.]} @ChgRef{Version=[2],Kind=[Deleted]} @ChgDeleted{Version=[2],Text=[On the other hand, X := A * B; is permitted by this rule, even if X, A, and B are all of different fixed point types, since the expected type for the result of the multiplication is the type of X, which is necessarily not @i(universal_fixed).]} @end(Discussion) @end{Legality} @begin{RunTime} The multiplication and division operators for real types have their conventional meaning. @redundant[For floating point types, the accuracy of the result is determined by the precision of the result type. For decimal fixed point types, the result is truncated toward zero if the mathematical result is between two multiples of the @i(small) of the specific result type (possibly determined by context); for ordinary fixed point types, if the mathematical result is between two multiples of the @i(small), it is unspecified which of the two is the result. @PDefn{unspecified}] @IndexCheck{Division_Check} @Defn2{Term=[Constraint_Error],Sec=(raised by failure of run-time check)} The exception Constraint_Error is raised by integer division, @key(rem), and @key(mod) if the right operand is zero. @Redundant[Similarly, for a real type @i(T) with @i(T')Machine_Overflows True, division by zero raises Constraint_Error.] @end{RunTime} @begin{Notes} @Leading@;For positive A and B, A/B is the quotient and A @key(rem) B is the remainder when A is divided by B. The following relations are satisfied by the rem operator: @begin{Example} A @key(rem) (-B) = A @key(rem) B (-A) @key(rem) B = -(A @key(rem) B) @end{Example} @Leading@keepnext@;For any signed integer K, the following identity holds: @begin{Example} A @key(mod) B = (A + K*B) @key(mod) B @end{Example} @begin{Bundle} @NoPrefix@Leading@;The relations between signed integer division, remainder, and modulus are illustrated by the following table: @begin{Example} A B A/B A @key(rem) B A @key(mod) B A B A/B A @key(rem) B A @key(mod) B 10 5 2 0 0 -10 5 -2 0 0 11 5 2 1 1 -11 5 -2 -1 4 12 5 2 2 2 -12 5 -2 -2 3 13 5 2 3 3 -13 5 -2 -3 2 14 5 2 4 4 -14 5 -2 -4 1 A B A/B A @key(rem) B A @key(mod) B A B A/B A @key(rem) B A @key(mod) B@* 10 -5 -2 0 0 -10 -5 2 0 0 11 -5 -2 1 -4 -11 -5 2 -1 -1 12 -5 -2 2 -3 -12 -5 2 -2 -2 13 -5 -2 3 -2 -13 -5 2 -3 -3 14 -5 -2 4 -1 -14 -5 2 -4 -4 @end{Example} @end{Bundle} @end{Notes} @begin{Examples} @Leading@keepnext@i(Examples of expressions involving multiplying operators:) @begin{Example} I : Integer := 1; J : Integer := 2; K : Integer := 3; X : Real := 1.0; --@RI[ see @RefSecNum{Floating Point Types}] Y : Real := 2.0; F : Fraction := 0.25; --@RI[ see @RefSecNum{Fixed Point Types}] G : Fraction := 0.5; @end{Example} @begin{Example} @tabclear()@tabset(P19, P31) @RI(Expression) @\@RI(Value) @\@RI(Result Type)@* @R{I*J} @\@R{2} @\@RI(same as I and J, that is, Integer) @R{K/J} @\@R{1} @\@RI(same as K and J, that is, Integer) @R{K @key(mod) J} @\@R{1} @\@RI(same as K and J, that is, Integer)@* @R{X/Y} @\@R{0.5} @\@RI(same as X and Y, that is, Real) @R{F/2} @\@R{0.125} @\@RI(same as F, that is, Fraction)@* @R{3*F} @\@R{0.75} @\@RI(same as F, that is, Fraction) @R{0.75*G} @\@R{0.375} @\@RI(universal_fixed, implicitly convertible) @\ @\@RI(to any fixed point type) @R{Fraction(F*G)} @\@R{0.125} @\@RI(Fraction, as stated by the conversion) @R{Real(J)*Y} @\@R{4.0} @\@RI(Real, the type of both operands after) @\ @\@RI(conversion of J) @end{Example} @end{Examples} @begin{Incompatible83} @ChgRef{Version=[2],Kind=[Added],ARef=[AI95-00364-01],ARef=[AI95-00420-01]} @Chg{Version=[2],New=[@Defn{incompatibilities with Ada 83}The universal fixed-fixed multiplying operators are now directly available (see below). Any attempt to use user-defined fixed-fixed multiplying operators will be ambiguous with the universal ones. The only way to use the user-defined operators is to fully qualify them in a prefix call. This problem was not documented during the design of Ada 95, and has been mitigated by Ada 2005.],Old=[]} @end{Incompatible83} @begin{Extend83} @Defn{extensions to Ada 83} Explicit conversion of the result of multiplying or dividing two fixed point numbers is no longer required, provided the context uniquely determines some specific fixed point result type. This is to improve support for decimal fixed point, where requiring explicit conversion on every fixed-fixed multiply or divide was felt to be inappropriate. The type @i(universal_fixed) is covered by @i(universal_real), so real literals and fixed point operands may be multiplied or divided directly, without any explicit conversions required. @end{Extend83} @begin{DiffWord83} We have used the normal syntax for function definition rather than a tabular format. @end{DiffWord83} @begin{Incompatible95} @ChgRef{Version=[2],Kind=[AddedNormal],ARef=[AI95-00364-01]} @Chg{Version=[2],New=[@Defn{incompatibilities with Ada 95}We have changed the resolution rules for the universal fixed-fixed multiplying operators to remove the incompatibility with Ada 83 discussed above. The solution is to hide the universal operators in some circumstances. As a result, some legal Ada 95 programs will require the insertion of an explicit conversion around a fixed-fixed multiply operator. This change is likely to catch as many bugs as it causes, since it is unlikely that the user wanted to use predefined operators when they had defined user-defined versions.],Old=[]} @end{Incompatible95} @LabeledSubClause{Highest Precedence Operators} @begin{StaticSem} @Leading@Defn{highest precedence operator}@Defn2{Term=[operator],Sec=(highest precedence)} @Defn{abs operator}@Defn2{Term=[operator],Sec=(abs)} @Defn{absolute value} The highest precedence unary operator @key(abs) (absolute value) is predefined for every specific numeric type @i(T), with the following specification: @begin(example) @key(function) "@key(abs)"(Right : @RI(T)) @key(return) @RI(T) @end(example) @Leading@Defn{not operator}@Defn2{Term=[operator],Sec=(not)} @IndexSeeAlso{Term=[logical operator],See=(not operator)} The highest precedence unary operator @key(not) (logical negation) is predefined for every boolean type @i(T), every modular type @i(T), and for every one-dimensional array type @i(T) whose components are of a boolean type, with the following specification: @begin(example) @key(function) "@key(not)"(Right : @RI(T)) @key(return) @RI(T) @end(example) The result of the operator @key(not) for a modular type is defined as the difference between the high bound of the base range of the type and the value of the operand. @Redundant[For a binary modulus, this corresponds to a bit-wise complement of the binary representation of the value of the operand.] The operator @key(not) that applies to a one-dimensional array of boolean components yields a one-dimensional boolean array with the same bounds; each component of the result is obtained by logical negation of the corresponding component of the operand (that is, the component that has the same index value). @IndexCheck{Range_Check} @Defn2{Term=[Constraint_Error],Sec=(raised by failure of run-time check)} A check is made that each component of the result belongs to the component subtype; the exception Constraint_Error is raised if this check fails. @begin{Discussion} The check against the component subtype is per AI83-00535. @end{Discussion} @Leading@Defn{exponentiation operator}@Defn2{Term=[operator],Sec=(exponentiation)} @Defn{** operator}@Defn2{Term=[operator],Sec=(**)} The highest precedence @i(exponentiation) operator ** is predefined for every specific integer type @i(T) with the following specification: @begin(example) @key(function) "**"(Left : @RI(T); Right : Natural) @key(return) @RI(T) @end(example) @Leading@;Exponentiation is also predefined for every specific floating point type as well as @i{root_real}, with the following specification (where @i(T) is @i{root_real} or the floating point type): @begin(example) @key(function) "**"(Left : @RI(T); Right : Integer'Base) @key(return) @RI(T) @end(example) @Defn{exponent} The right operand of an exponentiation is the @i(exponent). The expression X**N with the value of the exponent N positive is equivalent to the expression X*X*...X (with N@en@;1 multiplications) except that the multiplications are associated in an arbitrary order. With N equal to zero, the result is one. With the value of N negative @Redundant[(only defined for a floating point operand)], the result is the reciprocal of the result using the absolute value of N as the exponent. @begin{Ramification} The language does not specify the order of association of the multiplications inherent in an exponentiation. For a floating point type, the accuracy of the result might depend on the particular association order chosen. @end{Ramification} @end{StaticSem} @begin{ImplPerm} @Defn2{Term=[Constraint_Error],Sec=(raised by failure of run-time check)} The implementation of exponentiation for the case of a negative exponent is allowed to raise Constraint_Error if the intermediate result of the repeated multiplications is outside the safe range of the type, even though the final result (after taking the reciprocal) would not be. (The best machine approximation to the final result in this case would generally be 0.0.) @end{ImplPerm} @begin{Notes} @IndexCheck{Range_Check} As implied by the specification given above for exponentiation of an integer type, a check is made that the exponent is not negative. @Defn2{Term=[Constraint_Error],Sec=(raised by failure of run-time check)} Constraint_Error is raised if this check fails. @end{Notes} @begin{Inconsistent83} @ChgRef{Version=[1],Kind=[Added],Ref=[8652/0100],ARef=[AI95-00018-01]} @ChgAdded{Version=[1],Text=[@Defn{inconsistencies with Ada 83} The definition of "**" allows arbitrary association of the multiplications which make up the result. Ada 83 required left-to-right associations (confirmed by AI83-00137). Thus it is possible that "**" would provide a slightly different (and more potentially accurate) answer in Ada 95 than in the same Ada 83 program.]} @end{Inconsistent83} @begin{DiffWord83} We now show the specification for "**" for integer types with a parameter subtype of Natural rather than Integer for the exponent. This reflects the fact that Constraint_Error is raised if a negative value is provided for the exponent. @end{DiffWord83}