Unformatted version of **ai12s/ai12-0144-1.txt version 1.4**

Other versions for file**ai12s/ai12-0144-1.txt**

Other versions for file

!standard A.5.2(20) 15-11-19 AI12-0144-1/03

!standard A.5.2(32)

!standard A.5.2(41)

!class Amendment 14-12-04

!status ARG Approved 7-0-0 15-10-18

!status Promising (10-0-0) 15-02-26

!status work item 14-12-04

!status received 14-11-06

!priority Low

!difficulty Easy

!subject Make Discrete_Random more flexible

!standard A.5.2(32)

!standard A.5.2(41)

!class Amendment 14-12-04

!status ARG Approved 7-0-0 15-10-18

!status Promising (10-0-0) 15-02-26

!status work item 14-12-04

!status received 14-11-06

!priority Low

!difficulty Easy

!subject Make Discrete_Random more flexible

!summary

Add a more general function Random to Discrete_Random.

!problem

A recent StackOverflow question asked how to write a function:

to generate one random number in the range 0..n. n could be different
for each call.

It looks like this isn't easily possible using Ada.Numerics.Discrete_Random,
since a new instantiation of Discrete_Random must be declared inside
generate_random_number, and a new generator variable of type
Instantiation.Generator needs to be declared. The questioner tried Reset
to reset the generator to a time-dependent state each time, but this failed
because the procedure was being called faster than the clock was changing.

The most direct way to accomplish something like
this seems to be to use Float_Random, reset the generator, and then
perform the needed computations to yield a discrete random number.
This is unfortunate, because the Discrete_Random packages are no doubt
already performing these or related computations, and hopefully doing
it in a way that produces the best results, which is not trivial; but
these computations aren't available to a program (unless a compiler
vendor makes them available through a non-standard package).

!proposal

!wording

Add after A.5.2(20):

Add after A.5.2(32):

Obtains the "next" random number from the given generator, relative to its
current state, according to an implementation-defined algorithm. The result
of the function in an instantiation of Numerics.Discrete_Random is within the
range First .. Last, and is delivered as a value of the generic formal subtype
Result_Subtype. If the range First .. Last is a null range, Constraint_Error
is raised.

[Editor's note: During the ARG phone meeting of February 26, 2015, it was
suggested that the null range case raise Program_Error. However,
Constraint_Error is the existing exception for that (A.5.2.(39)), so we
used that here.]

Modify A.5.2(41):

A sufficiently long sequence of random numbers obtained by successive calls to
Random is approximately uniformly distributed over the range of the result
subtype{, or in the case of the version of Random with First and Last
parameters, over the range First .. Last}.

!discussion

The author ran into this problem with a hobby solitaire program. It was
necessary to use a reproducible generator (thus using a single generator
created using Reset with an Initiator parameter). The algorithm for dealing
cards is to create an array containing all of the cards, then select one from
that array using a random generator. Then close up the array, and repeat the
selection on the array (minus the selected card). This means you want to
select with ranges 1..52, then 1..51, then 1..50, etc.

That's not possible with the Ada 95 definition of Discrete_Random.

Users often accomplish this in ways that do not provide a truly uniform
distribution. It's easy to come up with methods that don't work (see the

!appendix

One algorithm that is correct is to start with a uniform random generator that produces an integer in the range 0 .. Large. (Usually Large is some power of 2 - 1). Then, for a call to Random with bounds First and Last, we determine Len := (Last-First+1) and then Mult, which is the largest multiple of Len that is less than Large. (Len cannot be greater than Large.) We then loop, getting a random value, and exiting the loop when the random value is less than Mult. Finally, we mod the random value (now in the range 0 .. Mult-1) by Len and add First. This loop will usually exit on the first iteration, and even in the worst case (Len = Large/2+1), there is at least a 50% chance that the loop will exit on each iteration. So it is unlikely that many iterations will be needed. If this was 1994, we should have simply defined Random in Discrete_Random as follows: function Random (Gen : Generator; First : Result_Subtype := Result_Subtype'First; Last : Result_Subtype := Result_Subtype'Last) return Result_Subtype; This allows leaving out the First parameter if it matches that of the formal subtype (which it usually will). Unfortunately, that is more incompatible, as renames and access-to-subprogram matching would fail (whereas the proposed solution is only incompatible if there are use-clause conflicts with the profile, which is unlikely). !ASIS No impact. !ACATS test !appendix !topic Allow random numbers for different discrete subtypes using same generator !reference RM12 A.5.2 !from Adam Beneschan 14-11-06 !discussion This arose from a StackOverflow question in which a questioner wanted to write a function: function generate_random_number (n: in Positive) return Integer is to generate one random number in the range 0..n. n could be different for each call. It looks like this isn't easily possible using Ada.Numerics.Discrete_Random, since a new instantiation of Discrete_Random must be declared inside generate_random_number, and a new generator variable of type Instantiation.Generator needs to be declared. The questioner tried Reset to reset the generator to a time-dependent state each time, but this failed because the procedure was being called faster than the clock was changing. Perhaps there are ways to get this to work with an initiator parameter on Reset. However, the most direct way to accomplish something like this seems to be to use Float_Random, reset the generator, and then perform the needed computations to yield a discrete random number. This is unfortunate, because the Discrete_Random packages are no doubt already performing these or related computations, and hopefully doing it in a way that produces the best results, which is not trivial; but these computations aren't available to a program (unless a compiler vendor makes them available through a non-standard package). I think there should be a way to generate random numbers for different discrete ranges using the same generator. Several possibilities come to mind: (1) Add to Discrete_Random: function Random (Gen : Ada.Numerics.Float_Random.Generator) return Result_Subtype; which would allow the program to set up one common generator using Float_Random. (2) Add to Float_Random: generic type Result_Subtype is (<>); function Random (Gen : Generator) return Result_Subtype; Basically the same as #1. (3) Add a new non-generic package that defines a common generator type that could be used in Random functions in Discrete_Random and Float_Random. This package would also define a common State type and provided the Reset, Save, Image, and Value subprograms currently provided by Float_Random and Discrete_Random. Since this question came from a StackOverflow poster who could have just been experimenting, I can't say how useful in practice this feature would be. It does seem like a flaw that it's missing, however. *************************************************************** From: Jean-Pierre Rosen Sent: Thursday, November 6, 2014 3:17 PM > It looks like this isn't easily possible using > Ada.Numerics.Discrete_Random Isn't it possible to use a random generator on Natural and return Value mod n + 1 ? (the quality of the random numbers might not be as good for big n's, but it may be sufficient in practice) *************************************************************** From: Adam Beneschan Sent: Thursday, November 6, 2014 4:47 PM Sure, if you don't want a uniform distribution. Unless the number of values in Natural (2**m for some m) is divisible by (n + 1), doing this will result in some values in the range being generated with a higher probability than others. There are ways to make things uniform. The point is that the implementors of Discrete_Random have, I presume, already figured out how to do this (I think they would have to in order to satisfy Annex G); why should we require that those with the kind of problem I wrote about have to reinvent the wheel? *************************************************************** From: Pascal Obry Sent: Thursday, November 6, 2014 4:10 PM > Isn't it possible to use a random generator on Natural and return > Value mod n + 1 ? > > (the quality of the random numbers might not be as good for big n's, > but it may be sufficient in practice) > Or better, just use Ada.Numerics.Float_Random and multiply by N. *************************************************************** From: Jean-Pierre Rosen Sent: Friday, November 7, 2014 2:32 AM > Sure, if you don't want a uniform distribution. Unless the number of > values in Natural (2**m for some m) is divisible by (n + 1), doing > this will result in some values in the range being generated with a > higher probability than others. Well, correct my maths if I'm wrong, but it seems to me that the average unbalance is (2**m rem (n+1)) / 2**m. If what is needed is a dice-4, dice-6 and dice-12, the unbalance would be neglectible (even up to n=2**20 for a 32 bits generator). *************************************************************** From: Randy Brukardt Sent: Friday, November 7, 2014 6:44 PM This problem happened to me in a hobby program: I needed to assign playing cards to a Solitare layout. I wanted to use a reproducible generator (thus using a single generator created using Reset with an Initiator parameter). To properly deal cards, it's best to create an array containing all of the cards, then select one from that array using a random generator. Then close up the array, and repeat the selection on the array (minus the selected card). This means you want to select with ranges 1..52, then 1..51, then 1..50, etc. Since m in this case is 52!, I'm pretty sure that no 32-bit or even 64-bit generator is going to be uniform using your formula. I ended up using Float_Random, using a loop to avoid having to do any sort of conversion out of float. (I couldn't find any way to make that work and still keep a uniform distribution.) It would have been nice to be able to use Discrete_Random for this case, especially as every simulation problem that I've ever dealt with has had this form. (None of which ever were work related, so I've never thought to bring this up at the ARG level.) What is the value of having a package that never can be used on actual problems?? Interestingly, I ended up with a better generator having used Float_Random, since our Discrete_Random is not going to generate an exactly uniform distribution -- it has the same conversion problems that I couldn't find any way to avoid with the card dealer. It's "good enough" for small ranges (like dice or cards) [as noted by J-P's formula], but some large ranges would have a noticeable non-uniformity. Probably should fix that someday. (And we all know "Someday Never Comes" - thanks to Credence Clearwater Revival. :-) *************************************************************** From: Jean-Pierre Rosen Sent: Friday, November 7, 2014 11:59 PM >> Isn't it possible to use a random generator on Natural and return >> Value mod n + 1 ? >> >> (the quality of the random numbers might not be as good for big n's, >> but it may be sufficient in practice) >> > > Or better, just use Ada.Numerics.Float_Random and multiply by N. This doesn't work. During the making of Ada95, there was a huge discussion between numerician about whether it was possible to make a discrete generator out of a floating one, and after megabytes of e-mail, the conclusion was that it was not possible. I'm not enough of a numerician to explain why, *************************************************************** From: Jean-Pierre Rosen Sent: Saturday, November 8, 2014 12:12 AM > This means you want to select with ranges 1..52, then 1..51, then > 1..50, etc. > > Since m in this case is 52!, I'm pretty sure that no 32-bit or even > 64-bit generator is going to be uniform using your formula. ?? m (if you refer to the number used as a parameter to the function we are discussing) is 52, then 51, ... Certainly a "small number" for the generator bias. As I use to say, I'm not a numerician, I just know enough of numerics to realize how easy it is to make incorrect statements about numerics when you are not a numerician. So I'm asking: 1) Is it a real problem? (i.e. worth spending time on it - we should take advice of real numericians) 2) What do other languages do? (to be fair, having a functionality is not enough if there is no guarantee of uniformity - anybody can write a bad random generator). *************************************************************** From: Jeffery R. Carter Sent: Saturday, November 8, 2014 12:36 AM >>> Isn't it possible to use a random generator on Natural and return >>> Value mod n + 1 ? >>> >>> (the quality of the random numbers might not be as good for big n's, >>> but it may be sufficient in practice) For some applications (games, for example) the statistics of the RNG may not be important, but for others, they are very important. Given an RNG that returns uniformly distributed values in 0 .. 2 ** M - 1 (Unsigned_32, for example, where M=32), taking R rem (N + 1) gives uniformly distributed results only when M rem (N + 1) = 0. All other cases will not be satisfactory for strict uses. >> Or better, just use Ada.Numerics.Float_Random and multiply by N. >> > This doesn't work. Right. Rounding R * N to the nearest integer results in zero and N appearing about 1/2 as often as 1 .. N - 1. That may not be acceptable even for some of the less strict uses. A better approach is to truncate R * (N + 1), but even that isn't acceptable for strict uses. This is the approach taken by the Random_Int function in PragmARC.Universal_Random. *************************************************************** From: Randy Brukardt Sent: Saturday, November 8, 2014 1:26 AM > > This means you want to select with ranges 1..52, then 1..51, then > > 1..50, etc. > > > > Since m in this case is 52!, I'm pretty sure that no 32-bit or even > > 64-bit generator is going to be uniform using your formula. > > ?? m (if you refer to the number used as a parameter to the function > we are discussing) is 52, then 51, ... Certainly a "small number" for > the generator bias. To use the *existing* Discrete_Random, you have to use an m that is a factor of all of them, as you can't create a new generator for each step (and you'd have to do that to use different instantiations). To use the float generator, you don't use "m" at all. > As I use to say, I'm not a numerician, I just know enough of numerics > to realize how easy it is to make incorrect statements about numerics > when you are not a numerician. Same here. But I know that I couldn't get even acceptable results out of the existing random generators without extreme care (and I don't have critical requirements) -- essentially I had to never convert the float value to any discrete type. (And I can't be certain I got it right as it is.) You noted that multiplying by N isn't enough, nor is truncating (that caused values to occassionally be out of range). I used a loop and a float compare to avoid that problem, but it might have left an extra value into one of the end intervals. I don't know of any way to avoid that problem (which is at least small enough for my purposes, given the float value is a long float, so we have n/2**53, which is pretty darn small). Note that Jeff Carter said the same thing: > Right. Rounding R * N to the nearest integer results in zero and N appearing > about 1/2 as often as 1 .. N - 1. That may not be acceptable even for some of > the less strict uses. It wasn't for my card dealing application, for which I wanted to simulate more than 100,000 deals (sometimes running into millions of deals). > A better approach is to truncate R * (N + 1), but even that isn't acceptable > for strict uses. This is the approach taken by the Random_Int function in > PragmARC.Universal_Random. That didn't even work for me, as there was a non-zero chance of R = 1.0; in that case the result ended up indexing out of the range of the upper end of the selection array (that's how I found out it was still wrong, a bizarre Constraint_Error after simulating several thousand deals). I ended up putting that value into the uppermost bin; that's makes the uppermost bin slightly more likely to be selected, but never more often than 52/2**53, which seemed small enough for my application. (That would take roughly 2**40 simulations to be significant.) I don't know of any way to avoid that problem, perhaps that's the source of the issue that J-P remembered reading about. But how to do this perfectly I don't know. The implementation of Discrete_Random in Janus/Ada is probably worse than that, because using a loop isn't practical if the range is more than a few hundred items, and I probably didn't have a real truncation operation available when I wrote it. Which I believe I had to do, because no "real numerician" provided an implementation that actually would work for Janus/Ada as it existed in the 1990s. The Float_Random was from Ken Dritz, but I don't think there was ever a matching Discrete_Random implementation (and I could find none in the literature). Probably it would be easier to find these things today (no Google in 1996), but of course rewriting and retesting that is a low priority in the absence of some customer demand. > So I'm asking: > > 1) Is it a real problem? (i.e. worth spending time on it - we should > take advice of real numericians) It's certainly a real problem in that there is a class of applications where neither Discrete_Random nor Float_Random (as currently defined) can be used to provide completely uniform behavior. Perhaps there is some numerical reason that the problem can never be solved, but we will need to be convinced of that. > 2) What do other languages do? (to be fair, having a functionality is > not enough if there is no guarantee of uniformity - anybody can write > a bad random generator). I don't think that other languages even had an equivalent for Discrete_Random back in the 1990s. Whether that's changed, I don't know; none of the languages I've ever used has had anything other than a float version. As such, this seems to be a self-made Ada problem. Whether or not the landscape for other languages has changed, it seems amazingly restrictive to have to select every random number from the same range. There are a lot of problems where that simply doesn't work. Perhaps there is some numerical reason for Discrete_Random (I don't recall the discussions that J-P mentioned, but that doesn't mean much for something that happened over 20 years ago) that would prevent it from being useful for a large class of problems. If that's true, it should be documented in the AARM so that at least us language lawyers will know why it can't be useful. I think this means that we'll need an AI and someone will have to be tasked to go off and scour the Internet for information. (We're never going to have enough "real numericians" in the ARG.) *************************************************************** From: Bob Duff Sent: Saturday, November 8, 2014 9:26 AM > For some applications (games, for example) the statistics of the RNG > may not be important, but for others, they are very important. Depends on whether you're playing for money. I'd like to play blackjack against a program that uses the "mod N" method. ;-) I thought the standard way to get a random integer in the range (say) 1 .. 6 is to get a random integer in the range (say) 0 .. 2**31-1, and throw away results >= 2_147_483_646. 2_147_483_646 is the largest multiple of 6 <= 2**31-1. Do this in a loop until you get a number in 0 .. 2_147_483_645. THEN do the "mod 6" and add 1. That loop terminates, and usually goes round just once. It's not much harder to program than the plain "mod 6" method. J-P wrote: > As I use to say, I'm not a numerician, ... Is that a French word? I've never heard it. When I put "define numerician" in google, it defines "numeration". ;-) I assume you mean "numerical analyst". I'm not one, either! Neither are most programmers, which is why it's good to have this sort of thing in the predefined libraries. Randy wrote: > I don't think that other languages even had an equivalent for > Discrete_Random back in the 1990s. Whether that's changed, I don't > know; none of the languages I've ever used has had anything other than > a float version. Lots of languages have pseudo-random generators that produce integers. Few have any strict requirements, which makes them useless for serious work if portability is desired. For example, C has rand(), which returns an int in the range 0 .. RAND_MAX. RAND_MAX = 2**31-1 on my machine. Some implementations of rand() are pretty bad, or so I've heard. I'm pretty sure rand() dates back to the early days of C, so before 1990s. > I think this means that we'll need an AI and someone will have to be > tasked to go off and scour the Internet for information. (We're never > going to have enough "real numericians" in the ARG.) Or ask somebody who knows what they're talking about (unlike me). For example, Ken Dritz or Paul Hilfinger. *************************************************************** From: Jeffrey R. Carter Sent: Saturday, November 8, 2014 11:56 AM >> A better approach is to truncate R * (N + 1), but even that isn't acceptable >> for strict uses. This is the approach taken by the Random_Int function in >> PragmARC.Universal_Random. > > That didn't even work for me, as there was a non-zero chance of R = > 1.0; in that case the result ended up indexing out of the range of the > upper end of the selection array (that's how I found out it was still > wrong, a bizarre Constraint_Error after simulating several thousand > deals). I ended up putting that value into the uppermost bin; that's > makes the uppermost bin slightly more likely to be selected, but never > more often than 52/2**53, which seemed small enough for my > application. (That would take roughly 2**40 simulations to be > significant.) I don't know of any way to avoid that problem, perhaps > that's the source of the issue that J-P remembered reading about. Other than Ada.Numerics.Float_Random, I've never used an RNG that produces 1.0, and I tend to forget that Float_Random may. My comment was for RNGs that don't. Universal_Random, for example, produces all multiples of 2**(-24) from zero to 1 - 2**(-24), so the truncation approach works fine with it. There is still a problem, similar to the problem with the remainder method for a discrete generator. The RNG produces M unique values in 0 .. 1-e. If M rem N /= 0, then the results of the truncation method are not uniformly distributed. (Universal_Random, for example, produces 2**24 unique values, and 2**24 rem 52 /= 0.) *************************************************************** From: Jeffrey R. Carter Sent: Saturday, November 8, 2014 2:43 PM > Depends on whether you're playing for money. I'd like to play > blackjack against a program that uses the "mod N" method. ;-) Then it's a business for someone. Not entirely a game. > I thought the standard way to get a random integer in the range > (say) 1 .. 6 is to get a random integer in the range (say) 0 .. > 2**31-1, and throw away results >= 2_147_483_646. > 2_147_483_646 is the largest multiple of 6 <= 2**31-1. > Do this in a loop until you get a number in 0 .. 2_147_483_645. THEN > do the "mod 6" and add 1. > > That loop terminates, and usually goes round just once. > It's not much harder to program than the plain "mod 6" method. Are we sure the results are uniformly distributed? > Some implementations of rand() are pretty bad, or so I've heard. The Turbo Pascal random number generator was very bad. If you plotted consecutive values as (x, y) coordinates you got vertical lines! But on one project I worked on that had pretty strict requirements for its random values, we combined it with another, not-great linear-congruential generator and got acceptable results. *************************************************************** From: Tero Koskinen Sent: Saturday, November 8, 2014 3:21 PM > 2) What do other languages do? (to be fair, having a functionality is > not enough if there is no guarantee of uniformity - anybody can write > a bad random generator). OpenBSD uses arc4random and arc4random_uniform(uint32_t upper_bound) functions for random numbers in LibreSSL (and other places also). Implementation for arc4random_uniform (which returns 32-bit unsigned integer below the specified value) is found from https://github.com/libressl-portable/openbsd/blob/master/src/lib/libc/crypt/arc4random_uniform.c And pasted here, in case the link does not work: uint32_t arc4random_uniform(uint32_t upper_bound) { uint32_t r, min; if (upper_bound < 2) return 0; /* 2**32 % x == (2**32 - x) % x */ min = -upper_bound % upper_bound; /* * This could theoretically loop forever but each retry has * p > 0.5 (worst case, usually far better) of selecting a * number inside the range we need, so it should rarely need * to re-roll. */ for (;;) { r = arc4random(); if (r >= min) break; } return r % upper_bound; } arc4random itself is found from https://github.com/libressl-portable/openbsd/blob/master/src/lib/libc/crypt/arc4random.c Operating system specific helper functions are at https://github.com/libressl-portable/openbsd/tree/master/src/lib/libcrypto/crypto They (OpenBSD/LibreSSL developers) have spent some time tuning their random generator, so I would assume it is good enough for most purposes. *************************************************************** From: Randy Brukardt Sent: Saturday, November 8, 2014 3:36 PM > Other than Ada.Numerics.Float_Random, I've never used an RNG that > produces 1.0, and I tend to forget that Float_Random may. My comment > was for RNGs that don't. I think that they all don't effectively. My recollection is that Float_Random generates a 64-bit random integer (2**64-1), and when that is scaled into a float value, it essentially rounds to 1.0. The definition of Float_Random means that we don't have to avoid that. (Although I do wonder if 0.0 and 1.0 are as likely to occur as any other bit pattern.) In any case, I used the implementation provided by Ken Dritz (and his associated test program), which was part of the Ada 9x work. [The test program isn't in the ACATS as its nature is to sometimes fail a couple of trials; he used 40 trials and it's OK if it passes at least 38. But it still can be OK and fail more often, since it's supposed to be random, after all. I've seen 4 failures on a single run (the next run typically has none). As an ACATS test, that wouldn't be of much use, since it would be theortically possible to fail all 40 trials and still be good. Note that a generator that *always* passed all of the trials would be insufficiently random, it would have a pattern to keep the Chi-squares low.] I *could* have done something wrong, but I doubt it. Discrete_Random is a different kettle of fish (I don't think there was a reference implementation, if there was, I didn't use it, or it was wrong). *************************************************************** From: Pascal Pignard Sent: Monday, November 10, 2014 2:39 PM Let's take the initial proposal from Adam: (1) Add to Discrete_Random: function Random (Gen : Ada.Numerics.Float_Random.Generator) return Result_Subtype; My understanding of the given problem is how to produce a "random" integer in a range specified at each call from a pseudo random generator of a known quality which produce for example 32 bits with each bit having the same probability at each draw. So for range as 0..(2**n)-1, it's trivial -> take n bits in the random number. For the other ranges, I'll take the example of a dice of 20 sides thus in range 1..20. Let's admit that adding an integer to a random number keeps the quality of this number. It's like a translation. So we can translate to 0..19. Take the greatest power of two minus one less than 19, that is 15 or (2**4)-1, so take four bits of the random number. Note: whatever the position of the bits as the have the same probability for each. Thus we have a random u in range 0..15. Take now two others bits, so we have a random v in range 0..3. Take one more bit, so we have a random w in range 0..1. Add then all x = u + v + w, so we have a random x in range 0..19. Plus one, we have a random x in range 1..20. Of course we have to care if the number of random bits fits in the range of the random generator and maybe others things like to get a high quality n bits pseudo random generator. It seems then feasible to get such a function. *************************************************************** From: Gustaf Thorslund Sent: Monday, November 10, 2014 3:39 PM > Add then all x = u + v + w, so we have a random x in range 0..19. > Plus one, we have a random x in range 1..20. No, I'm afraid you cannot do that. If you have two dice and add the numbers of them you will not get an even distribution (7 being the most common sum). It should not be too much work calculating the distribution of your suggestion. If you on the other hand (like Bob Duff already suggested) throw away the numbers outside the range, and retry until you get a value inside the range, you should get an even distribution over that range. If you for example would roll a six sided dice, throw away and retry every time you get a six, you will basically get a five sided dice since those values will still be an even distribution. As Bob also said you would throw away the values outside an even multiple of the range, else you'll need to loop for awhile if you want to make a dice out of a 64 bit number. Looks like the code Tero posted also loops until it finds a value inside a range. *************************************************************** From: Randy Brukardt Sent: Tuesday, November 11, 2014 12:16 AM > > Add then all x = u + v + w, so we have a random x in range 0..19. > > Plus one, we have a random x in range 1..20. > > No, I'm afraid you cannot do that. If you have two dice and add the > numbers of them you will not get an even distribution > (7 being the most common sum). It should not be too much work > calculating the distribution of your suggestion. Right. When dealing with probabilities and distributions and the like, the operative phrase is that "everything you know is wrong". In particular, ordinary mathematics can't used to combine probabilities, and in fact little can be done at all if the probabilities aren't independent. > If you on the other hand (like Bob Duff already suggested) throw away > the numbers outside the range, and retry until you get a value inside > the range, you should get an even distribution over that range. If you > for example would roll a six sided dice, throw away and retry every > time you get a six, you will basically get a five sided dice since > those values will still be an even distribution. > > As Bob also said you would throw away the values outside an even > multiple of the range, else you'll need to loop for awhile if you want > to make a dice out of a 64 bit number. > > Looks like the code Tero posted also loops until it finds a value > inside a range. Clearly, we can write such a function. The question is how to add it to the existing Ada libraries. I don't like any of Adam's suggestions, because they all cause cross-contamination of the float and discrete libraries (which should be independent, IMHO). Moreover, they all continue needing to use one instantiation per range of values, which is trying to shoehorn something dynamic into a compile-time construct. It can be done, but it's clunky at best. I'd go with a much more straightforward approach: function Random (Gen : Generator; First : Result_Subtype := Result_Subtype'First; Last : Result_Subtype := Result_Subtype'Last) return Result_Subtype; Obtains the "next" random number from the given generator, relative to its current state, according to an implementation-defined algorithm. The result of the function in an instantiation of Numerics.Discrete_Random is within the range First .. Last, and is delivered as a value of the generic formal subtype Result_Subtype. --- The question with this is whether we can accept the level of incompatibility that's associated with changing the profile of a library-defined function. The suggested change would allow calls to be unchanged, but would break any renames or access-to-subprogram uses. We could avoid that by using overloading instead, leaving the existing function alone and dropping the default values of the parameters. That's slightly less flexible (usually, you'd only want to give Last), but it's more compatible. (It's still not 100% compatible, because of use-visibility and the possibility of user-defined Random functions.) function Random (Gen : Generator; First : Result_Subtype; Last : Result_Subtype) return Result_Subtype; Obtains the "next" random number from the given generator, relative to its current state, according to an implementation-defined algorithm. The result of the function in an instantiation of Numerics.Discrete_Random is within the range First .. Last, and is delivered as a value of the generic formal subtype Result_Subtype. ***************************************************************

Questions? Ask the ACAA Technical Agent